Magnetic Chuck for Conventional Milling

Magnetic Chuck for Conventional Milling, Square Electro Permanent Magnetic Table, Super Powerful Magnetic Table Electric Permanent Magnet Chuck for Milling, Magnetic & Vacuum Chuck, Surface Grinder Permanent Magnet Chuck, High Precision Machine Tool, Rectangular Electromagnetic Chuck, Finepitch Electromagnetic Chuck, Magnetic Table, Electromagnetic Square Magnetic Chuck China supplier factory

Magnetic Chuck for Conventional Milling  Specifications:
Model: MP-PEX Series
Use:
Clamping for heavy machining for medium to large work pieces
Features:
With double sided clamping surfaces
Can be self-clamped on the machine table
Top surface clamping and bottom surface clamping can be controlled by different channels
Channel 1 for top surface clamping, Channel 2 for bottom surface clamping
Square pole size 70×70 mm
Magnetic force higher than 690 kg per pole
With no deformation owing to the rise of the temperature
No residual magnetism
Wokpiece larger than the table size are machinable
Multiple magnet combinations can provide clamping for any table size

This magnetic system offers the highest strength for the broadest size range of work.
This also allows the use of top tooling to create more access to the work piece.

Electro-Permanent Magnetic Technology
Allows for:
High Strength
– Dual magnetic system for enhanced power

Top Tooling
– Workpiece is lifted off of Magnet face allowing for:
– Five sided machining
– Thru hole machining
– Minimizing chip contamination

High Accuracy
– Due to no heat generation

Palletizing
– Plug & socket design
– Power only required to turn “On” or “Off”

Safety
– Not affected by power failure
– Fully Sealed

Flexibility
– Variable power settings

One fixture for multiple size parts
– Multiple units can be used to cover larger surface or non-symmetrical parts

Use:
1.Widely used in a variety of machine tool rotary working platform, such as CNC five-axis machining center, horizontal Lathe and big boring machine, horizontal machining center, deep hole drilling, drilling and milling machine and six-axis deep hole drilling, etc. Milling Electro-permanent Magnetic Chuck Square Poled
2.Best used for the workpieces at least 250*250 mm and 10 mm thick.used for small, medium dimensions with normal operating air gaps and thinner workpieces.

Standard Features and Benefits:
1．Flexibility :
• Allow single set-up machining with 5-sided accessibility
• workpieces larger than the table are machinable
2．Safety
• No electric power supply during clamping. Square Pole Standard Electropermanent Magnetic Clamping
• Constant and uniform magnetic power over entire area.
• No temperature rise in operation. so no impact on precision and work piece deformation due to temperature rise.Can used for long time.
3．Efficient
• Easy and quick position,reduce set-up time and increase available machine time.
• High accuracies and tolerances
4．Cost-effectiveness
• no maintenance
• no machine modifications
• reduced tool consumption

Round Electro Permanent Magnetic Chuck

Unit: mm(in)