Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Tapped Hole Type Filter Rod Magnet Separator, Super Strong Easy-cleaning Bar Magnets, Stainless Steel NdFeB Magnetic Stick Rods, Rare Earth SmCo Neodymium magnetic rods, stainless steel encased rare earth magnetic tube, SS304/316 Separator Magnetic Filter Bar Roller, Permanent Magnetic Rod separator filter bar magnets China supplier
Tapped Hole Type Filter Rod Magnet Separator Design options
Alternative magnetic material Neodymium Ndfeb, Samarium Cobalt (SmCo) , Hard Ferrite
Tube 304 (1.4301 standard), 316L (1.4404)
Working temperature Standard magnetic material: -20°C to +80°C Other temperatures are possible and must be agreed upon.
Magnetic rods are mainly made of stainless steel tubes with strong magnets sealed inside. There are magnetically conductive steel washers between adjacent magnets. By concentrating the magnetic field, the surface maximum magnetic flux density can achieve 13000 gauss. The strong magnetic field can attract iron impurities and other ferromagnetic particles near the magnetic rod surface. Magnetic rods are widely used in some cleaning and separation processes, such as the food, pharmaceutical and chemical industries.
magnetic rod diagram rod magnet drawing
Magnet materials: Neodymium magnet, samarium cobalt magnet.
Tube materials: SS304, SS316, SS316L, PTFE (Teflon).
End types: Flat, tapped hole (female thread), screw bolt (male thread), cylindrical pin, conical, eyebolt.
Sealed magnetic system Cylindrical Pin Head Filter Magnet Separator
The magnetic system of the magnetic rods, series MFS, is enclosed by a stainless steel tube. The nonmagnetic end pieces (can be supplied with inner thread or outer thread) are welded all around with the tube. It is thus ensured that the installed Neodymium permanent magnets do not come into contact with the product.
Screw Bolt Head Bar Filter Magnet
This type of rods can be used in the powder- and fluid sector.
We only use high quality rare earth magnet material out of NdFeB. Our standard reaches the following magnetic specific values:
– Energy product max. 342 kJ/m3
– Coercive force >= 876 kA/m
– Remanence Br max. 1370 mT (13700 Gauss)
Magnetic Rod Surface Magnetic Field Strength
|Available Gauss Value Levels|
|* The data in this table are for reference only, more custom magnetic rods can be available upon request.|
Contact Online Now!