compression bonded isotropic NdFeB magnet

/Tag:compression bonded isotropic NdFeB magnet
  • Neodymium Magnet Guide

Neodymium Magnet Guide

Neodymium Magnet Guide Neodymium Information Collectively known as Rare Earth magnets, Neodymium Iron Boron (NdFeB) and Samarium Cobalt (SmCo) magnets are alloys of the Lanthanide group of elements. Rare Earth magnets are the most advanced commercialized permanent magnet materials today. NdFeB magnets are available in a number of different grades that span a wide range [...]

  • Compression Bonded Moulded NdFeB Magnet

Compression Bonded Moulded NdFeB Magnet

Compression Bonded Moulded NdFeB Magnet Compression bonded magnets are composed of a special form of NdFeB powder with adhesive and using compression molding techniques in simple tools, it can be quickly machined into complex shapes. Since its materials are isotropic, bonded NdFeB magnet can be magnetized in any direction or with multiple poles. Special magnetizing [...]

  • Typical Compression Bonded Magnetic Properties

Typical Compression Bonded Magnetic Properties

Typical Compression Bonded Magnetic Properties Many suppliers publish specifications for a nominal 10 MGOe magnets with a minimum limit of 9 MGOe. Similar for a nominal 11 MGOe magnet; minimum limit is 10 MGOe. Have to design to lower limit of BHmax Typical Compression Bonded Magnetic Properties BHmax Improvement in Compression Bonded Magnets The BHmax of a compression bonded isotropic NdFeB magnet is influenced by the following two factors: 1. Volume fraction of magnetic phase in the magnet – typically measured by the density of the magnet. • We are investigating increasing the pressing pressure which requires special press construction, lubricants and tooling materials – current production pressing pressures are 7tonnes/cm2 for 5.9 g/cm3 and 10MGOe; estimated that > 20 tonnes/cm2 required for 6.3 g/cm3 and > 11 MGOe. • Optimize the particle encapsulation chemistry and process. • Tailored multimodal PSD’s for maximum packing density. • Particle shape control. 2. Magnetic powder Br/BHmax • Increase isotropic Br of powders while maintaining sufficient Hci to have “linear” B‐H  demagnetization characteristic at the application temperature. Arc Permanent Magnet Neodymium Nickel N35UH   Neodymium Generator Arc Magnet Nickel N33H   Arc Neodymium Magnet Nickel N30H   Segment Neodymium Magnet Nickel N52

By |May 7th, 2018|Bonded Magnets, Bonded NdFeB, Compression Molded NdFeB, Magnet Properties, Magnetic Knowledge, Magnetic Powders, NdFeB|Comments Off on Typical Compression Bonded Magnetic Properties
error: Content is protected !!