10 x 10 x 4mm Square NdFeB Copper Plated Magnet N40

10 x 10 x 4mm Square NdFeB Copper Plated Magnet N40, Super Strong Rare Earth Licensed Sintered NdFeB Block Magnet for Motor Sensor Rotor Toy, Cu Coating Neodymium Rectangle Permanent Magnets China Supplier

10 x 10 x 4mm Square NdFeB Copper Plated Magnet N40 Technical Specifications:
Item: NBN40-10-10-4-C
Grade: N40
Material: Neodymium (NdFeB)
Plating: Nickel
Shape: Block, Rectangular, Rectangle, Square
Dimension:
Length (L): 10 mm
Width (W): 10 mm
Height (H): 4 mm
Tolerance: ±0.05 mm
Magnetisation Direction: Axial / Radial
Residual Magnetic Flux Density (Br): 1380-1420 mT (13.8-14.2 kGs)
Energy Density (BH)max: 366-390 KJ/m³ (46-49 MGOe)
Coercivity Force (Hcb): ≥ 923 kA/m ( ≥ 11.6 kOe)
Intrinsic Coercivity Force (Hcj): ≥ 876 kA/m ( ≥ 12 kOe)
Maximum Operation Temperature: 80 °C
Delivery Time: 14-35 days

MPCO offers neodymium magnets in square and rectangular blocks. These neodymium iron boron magnets are widely used for motor, sensor and holding applications.
Features include:
• Neodymium magnets are the most powerful commercially produced magnets.
• Neodymium magnets are hard and brittle and may chip or break if dropped.
• Neodymium block magnets are magnetized through the thickness.
• Uncoated neodymium magnets may corrode in humid conditions.
• Operating temperatures vary among material grades. For a comparison of neodymium material grades, please visit our chart of material properties.
• Neodymium magnets are often assembled into products using strong adhesives such as Loctite 325. Make sure that all contact surfaces are clean and dry prior to bonding.
• Please use caution when handling magnetized neodymium magnets, their exceptional magnetic force may cause them to attract to metal (or to each other) so strongly that fingers in their path could prove painful.

Material: sintered NdFeB permanent magnets with high performance. Super Strong Square Rare Earth Sintered Powerful NdFeB Magnet

Magnet grade: series N(N33~N52); series M(35M~50M) ; series H(35H~48H); series SH(35SH~48SH); series UH(30UH~40UH); series EH(30EH~38EH)
Application: widely used in the areas of wheel motors, wind power generators, speakers, voice coil motors, MRI, vibration motors and other high performance industrial motors.
Forming range: Cylinder : Φ6mm~Φ80mm
Block: 2.5*2.5*2.5mm~120*100*35
Coating : Zinc, Nickel, Epoxy, Passivated etc.
Shap: customized (block, bar, ring, tile, cylinder etc.)