2-Poles Rotor AlNiCo Magnet in Mounting Shafts

2-Poles Rotor AlNiCo Magnet in Mounting Shafts, Turbine Generator Rotor Permanent AlNiCo Magnet, 2-Poles Synchronous Motors and Dynamos Cast Alnico Magnet, Multi-Poles AlNiCo Magnet Assemblies, rotor shaft magnet, Multi Polar Alnico Magnetic Core, custom alnico rotor magnet China FACTORY

2-Poles Rotor AlNiCo Magnet in Mounting Shafts Paramenters
Part No.  MPCOARM-2 SERIES
Standard Size: 0.437″ Dia. x 0.437″, 0.625″ Dia. x 0.625″, 0.875″ Dia. x 1.000″, 1.250″ Dia. x 0.750″, 1.250″ Dia. x 1.375″, 2.120″ Dia. x 2.060″
Number of Poles: 2

Features:
Permanent alnico magnet material
Especially effective on thin metal
4-Pole Magnetic face
Permanent alnico 5 magnet material. Especially effective on thin metal. 4-Pole magnetic face. Counter sunk center mounting Hole.
Alnico magnets are designed with multiple poles; each pole alternates in polarity. The hole in the rotor is designed for mounting onto shafts. They are excellent for use in synchronous motors, dynamos and air turbine generators.

ALNICO magnets are made from aluminum, nickel, cobalt, copper and iron. Great for high heat applications. Maximum working temperature 975°-1020° F.
We can supply various sizes of AlNiCo magnets, according to the customer’s requests and designs. Please contact us and provide the shape, size, tolerance and grade of ALNiCO magnets. If you need assistance with your requirements, please contact us.

rotor magnets are designed with multiple poles; each pole alternates in polarity. The hole in the rotor is designed for mounting onto shafts. They are excellent for use in synchronous motors, dynamos and air turbine generators.
Features
• Alnico rotor magnets are made with Alnico 5 material and have a maximum temperature of approximately 1000°F.
• They are supplied un-magnetized unless otherwise requested. Magnetization after assembly is required to gain the full benefits of these magnets.
• We provide a magnetization service for assemblies incorporating these magnets. We can normally magnetize them within one working day of receipt.

Alnico Magnets – Alnico is hard and brittle, and prone to chipping and cracking. Special machining techniques must be used to machine this material. Alnico magnets require magnetizing fields of about 3 kOe (kilo Oersted). Because of their relatively low coercivities, special care should be taken to assure that alnico magnets are not subjected to adverse repelling fields, since these could partially demagnetize the magnets. Magnetized magnets should be stored with “keepers” to reduce the possibility of partial demagnetization. If alnico magnets are partially demagnetized, they may be easily re-magnetized. Multi-Pole AlNiCo Magnet Assemblies for Rotor, Multi-Poles Magnets AlNiCo Rotor Assemblies, 4-Poles Cast Multi-Polar AlNiCo Magnet for Rotor Turbine Generator

Cast Alnico can be made into intricate and complex shapes, which is not possible with other magnetic materials.