28kg KD732 Neodymium Magnetic Socket Joint

28kg KD732 Neodymium Magnetic Socket Joint, Magnetic Socket Joint Holding Optical Systems Magnetic Connector, KD732 Rare Earth Ball Joint Magnets Used for fixing optical equipment, lighting fixtures, monitoring cameras, retaining medical equipment, and in robotic joints, Nickel / Brass Plated Permanent NdFeB Magnetic Ball Joint Assemblies, Magnetic Pole Position, Magnetic Universal Joint Fitting, holding device Rare Earth Magnets China Supplier

28kg KD732 Neodymium Magnetic Socket JointDETAILS
Grade: KD732 / KD-732 (Brass / Copper plated)

Product range Magnetic ball joints with ball retention in its cavity by permanent magnet
Extra informations Operating temperature: Max. 100 C. Tolerances: KL / GL 1.0 mm. ø D ground, tolerance h6 (except type K8) general tolerance 0.1 mm. Special design possibilities: -galvanisation on all sides -temperatu
Technical characteristics
Magnet material In steel
Mass and dimensions
Shape patella
Dimension L 35 mm
Outside diameter D 32 mm
Mechanical data
Holding force 280 N
Diameter of the rotule 25 mm
Dimension KL 98 mm
Dimension G M5
Dimension GL 16 mm
Dimension IG M5
Dimension IGL 10 mm

28kg KD732 neodymium magnetic socket joint universal ball joint Features
Made with powerful NdFeB magnet
Suitable for use in exhibition stands or truss display systems
Body made of brass with tapped hold to mount on any surface
Can hold anything within stipulated load at any angle
Allows the steel ball to rotate a full 360 degrees on a 180-degree axis

Knowing This Tool
28kg KD732 neodymium magnetic socket joint universal ball joint is a holding device that has flexible joints with a 8-25 mm diameter steel ball, which is held by rare earth magnets contained in the magnet cylinder. The magnetic ball joints allow the steel ball a full 360-degree rotation on a 180-degree axis. This way no damage occurs if the ball comes off the magnet cylinder, and the joints can work just as well as before when reset.

This novel magnetic ball joint has phenomenal holding power for up to 2kg of attached weight wile permitting the ball a full 360° rotation on a 180° axis. You can freely orient your equipment to an infinite number of positions within this rotation. This is made possible by the combination of a steel ball (1mm diameter) and a powerful rare earth magnet contained in the magnet cylinder (10 x 20mm). Convenient M3 attachment sites are provided on both the ball (male) and the magnet base (female).

For use with micromanipulators for the positioning and holding of optical instruments including various lighting sources and lasers, pipettes and any small parts that would benfit from the flexibility offered by this new magnetic ball joint.

Magnetic Joint Ball Dimension

Powerful Ball Joint Rare Earth Magnet KD-625, KD625