8″ x 8″ Square Permanent Magnetic Grid Separator Filter 4 Rods One Row, Separator Rod Filter Magnet, Magnetic Grill, Magnetic Grate, Grate Magnets, Hopper Magnet, Powerful Neodymium Magnetic Grills, Stainless Steel Filter Grate Permanent Magnet, Magnetic Filter Tubes, NdFeB Separator Grid Magnet, magnetic filter system, magnetic rods cartridges China supplier factory
8″ x 8″ Square Permanent Magnetic Grid Separator Filter 4 Rods One Row Parameter:
Item No MPCO-SMGD-8/8/2C
Dimension
Length – 8″ (203.2mm)
Width – 8″ (203.2mm)
Height – 2″ (50.8mm)
Tube Diameter – 1″ (25.4mm)
Spacing between magnetic tubes – 1″ (25.4mm)
Material 304 Stainless Steel
Surface Field 8000 Gauss
Max. Oper. Temperature 80 C
Grade Rare Earth N52 Magnets Inside the Tubes
Additional Specifications
Pressed in Aluminum End Cups
Magnetic filter bar is a common magnetic component, widely used in many industries. The surface of the magnetic filter bar will rely on its special internal design to generate a strong magnetic field strength, and then remove iron impurities and magnetic substances from the material to be processed. The magnetic filter bar is also the most important component in the magnetic separator system. 6″ x 6″ Square Magnetic Grill Grids 4 Bars 1-Row
Ss316 Seamless Stainless Steel Housing Magnetic Filter/Hopper Magnet/Grill Magnet
2.The structure of magnetic filter
The structure of magnetic filter can be divided into four parts:
♦ Stainless steel tube.
♦ Permanent Magnets.
♦ Spacers
♦ Stainless steel plug.
3. The Magnet in Magnetic Filter Bar
The type and grade of the magnet in a magnetic filter bar base on the different requirements of Max. Operating Temperature and Max. Surface Gauss Value. The Ferrite, NdFeB and SmCo can all be applied in magnetic filter bar
4. The Type of Magnetic Filter Bars
♦ Threaded hole-type.
♦ Double screw bolt-type. 304 Stainless Steel Square Hopper Magnet at Best Price 3 Bars 1-Layer
♦ Tip-type.
Buy Square Magnetic Grids and Grates online with MPCO
The Square Magnetic Separator Grid can be bought is sizes varying from between 100mm x 100mm up to 500mm x 500mm. The sizes change in 50mm increments.
The Separator Magnet Rods are made from Neodymium Iron Boron, NdFeB, magnets, assembled in repulsion and our Food Grade range are then then encased in a food quality stainless steel casing that is sealed by welding and then the welds are cleaned and polished. This allows the Magnetic Separator Grid to be long lasting, easy to clean and simple to maintain. 6″ x 6″ Separator Hopper Square Grate Magnet Lower Price 3 Bars 2-Layers
The optimum magnetic ‘straining’ is achieved by the holding of the Separator Magnet Rods in position by the stainless steel plates. The gaps between the Separator Magnet Rods prevent bridging during capture of the ferrous contamination.
It is suggested that, by stacking the grids, there is an increased chance of collecting more ferrous particles.
Ferrous contamination can be removed from free-flowing substances such as tea, coffee, sugar, animal feed, grains, powders, shredded plastics/paper/metals, etc. 8″ x 8″ Separator Magnetic Grids and Grates Square 5 Bars One-Layer
Related