Anisotropic Sintered Sm-Co Block Magnet 50x20x3mm

/Anisotropic Sintered Sm-Co Block Magnet 50x20x3mm
  • Anisotropic Sintered Sm-Co Block Magnet 50x20x3mm
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Anisotropic Sintered Sm-Co Block Magnet 50x20x3mm, Raw Magnetic Materials High Performance High Temperature Permanent Block Rectangle Bar shaped Motor Generator Magnets, Sintered Samarium Cobalt Rare Earth SmCo Magnets for various electric motors, instruments, sensors, detectors, radar, Powerful Sintered Samarium Cobalt Rectangular Square Cube Magnet China Supplier

    Anisotropic Sintered Sm-Co Block Magnet 50x20x3mm Item NO.  MPCO-SCB series
    Grade: YXG-28 / Customized
    Material: SmCo Magnet
    Composite: Sm,Co,Fe and other trace metal elements
    Shape: Block / Rectangular / Bar / Square
    Size: 50x20x3mm or Customized magnet size
    Working Tempt. : 250℃-350 ℃
    Tolerance: +/-0.05mm~+/-0.1mm

    Samarium Cobalt Magnets are typically manufactured by a powdered metallurgical process utilizing rigid steel or rubber molds.
    Fully dense Samarium Cobalt rare earth magnets are usually manufactured by a powdered metallurgical process. Micron size Samarium Cobalt powder is produced and then compacted in a rigid steel mold. The steel molds produce shapes similar to the final product, but the mechanical properties of the alloy usually inhibit complex features at this stage of the manufacturing process.
    The Samarium Cobalt’s magnetic performance is optimized by applying a magnetic field during the pressing operation. This applied field imparts a preferred direction of magnetization, or orientation, to the Samarium Cobalt magnet alloy. The alignment of particles results in an anisotropic alloy and vastly improves the residual induction (Br) and other magnetic characteristics of the finished magnet.
    After pressing, the Samarium Cobalt magnets are sintered and heat treated until they reach their fully dense condition. The rare earth magnet alloy is then machined to the final dimensional requirements and cleaned.

    Material SmCo
    Configuration block, cylindrical, segment shaped
    Other characteristics anisotropic, isotropic, encapsulated, with cylindrical bore, low-loss, with threaded hole, nickel-copper-nickel coated, nickel-coated, epoxy-coated
    Applications for motors, for sensors, for medical applications, for elevators, for reed sensor actuation, for loudspeakers, for workshop tools, for automotive applications

    The corrosion resistance of SmCo magnet is considered good. Although Surface coating or plating is not generally required for SmCo magnet, all kinds of surface coating are also available, like Nickel, Zn, Ni-Cu-Ni, Gold, Silver, Sn,Chrome, ABS coating, Rubber coating, PTFE(Teflon) coating, stainless steel case and Epoxy coating etc. Permanent Rare Earth Magnets SmCo Bars 50x12x3mm, Permanent Rare Earth Samarium Cobalt Rectangular Magnets 50x10x10mm, 2X2X1 Inch Anisotropic SmCo Block Magnet

    Samarium Cobalt (Rare Earth) Magnets are often used in high temperature applications needing high magnetic performance and where magnetic stability over a wide range of temperatures is important. Magnosphere can help optimize performance and cost with SmCo magnets in grades from 16 to 32 MGOe and temperatures up to 350°C/662°F. Samarium–Cobalt Magnet is a strong permanent rare earth magnet made of an alloy of samarium, cobalt, Fe, Cu, Pr and Zr.

    error: Content is protected !!