Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Bonded NdFeB Rectangular Magnet, Isotropic Compression Molded Rare Earth Neodymium Rectangular Magnet, BNP-10 thermoplastic bonded NdFeB block permanent magnets assemblies for Sensor and Motor, CUSTOM MOLDED BONDED NEO MAGNET, Automotive Polymer-Bonded Neodymium Magnets China Supplier
Bonded NdFeB Rectangular Magnet Technical
Material: Plastic Binders and NdFeB Powder
Part No.: MPBD-CDMB03
Plating / Coating: Black Epoxy
Shape: Block / Rectangular
Tolerance: ±0.1 mm
Maximum Operation Temperature: 100 °C ~ 150 °C
Delivery Time: 7-15 days
Made in China
ABOUT BONDED NEODYMIUM / CUSTOM MOLDED MAGNETS
MPCO is an industry leader in the design and production of injection molded magnets. These unique magnets are made by mixing magnetic material with a polymer binder (usually nylon or PPS) which then allows the magnet to be injection molded just as any other plastic would be.
Injection molding allows the production of intricately shaped magnets with extremely tight tolerances and a wide variety of physical and magnetic characteristics.
A wide range of properties are possible depending on the type of magnetic material and binder utilized. MPCO offers both Neodymium and Hard Ferrite injection molding capability, and it is also possible to utilize a blend of different magnetic material to produce the desired properties.
MPCO’s knowledgeable product development team will assist you in choosing the optimal combination of binder and magnet material for your specific application. compression molded block magnet
One of the greatest advantages of the injection molding process is that a high degree of shape complexity is possible — ie. gears, snap fits and undercuts. It is also possible to incorporate shafts, brushes and other inserts into the process, simplifying the magnetic assembly manufacturing process. Injection molded magnets can be insert molded directly onto or around existing components, often eliminating the need for additional steps in the manufacturing process.
Compression bonded neodymium magnets are ideal for applications requiring tight tolerances and high magnetic strength. They are isotropic – so they may be magnetized in any direction – and the epoxy binder allows bonded magnets to be resistant to most industrial automotive fluids and solvents. Compression bonded magnets exhibit good mechanical strength. Tooling costs are generally lower than they are for injection molded parts. Bonded magnets have an operating temperature range from -40˚C to 165˚C.
Contact Online Now!