Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Cubemagnet Neodymium Golden Plating N48 10mm, Amazing Cube Permanent Magnets, Rare Earth Extremely Elegant Cubical NdFeB Magnet, Magic Toy Puzzle Magnet Block Cubes, Whiteboard Fridge Magnets China Factory
10 mm x 10 mm x 10 mm Cubemagnet Neodymium Golden Plating N48 Technical Specifications:
Material: Neodymium (NdFeB)
Shape: Cube, Cubical, Cubio
Length (L): 10 mm
Height (H): 10 mm
Width (W): 10 mm
Tolerance: ±0.05 mm
Magnetisation Direction: Axial / Radial
Residual Magnetic Flux Density (Br): 1380-1420 mT (13.8-14.2 kGs)
Energy Density (BH)max: 366-390 KJ/m³ (46-49 MGOe)
Coercivity Force (Hcb): ≥ 923 kA/m ( ≥ 11.6 kOe)
Intrinsic Coercivity Force (Hcj): ≥ 876 kA/m ( ≥ 12 kOe)
Maximum Operation Temperature: 80 °C
Delivery Time: 14-35 days
Elegant and extremely strong: Neodymium cube 10 mm. Its strength is high enough even for magnetic glass walls or magnetic paint. Neodymium magnets are made of neodymium, iron and boron and are the strongest raw magnets.
Cube-shaped magnets are somewhat unusual. These are strong enough to attract each other through the thickness of a hand. It takes a bit of determination to separate two of these magnets from each other.
Also interesting in combination with steel spheres.
Neodymium cube magnets are great magnets for pin boards or other magnetic surfaces, the fridge for instance. The ideal product is a neodymium cube magnet with a 7 mm edge length. Its adhesive force is sufficient for postcards, notes, photos, etc. At the same time, the neodymium magnet is small, unobtrusive and does not perforate paper. For thicker cardboard or posters or for use on a magnetic glass board, we recommend extra-high adhesive force.
cube shape magnet magnetic cube Operating temperature: A low coercivity grade Neodymium magnet may begin to lose strength if heated above 176°F (80°C). High coercivity grade Neodymium Magnets have been developed to function at temperatures up to 428°F (220°C) with little irreversible loss. The need for low temperature coefficient in neodymium magnet applications has triggered several grades to be developed to meet specific operating requirements. Please refer to our chart of magnetic properties to compare the characteristics of each grade.
Corrosion: Neodymium magnets are vulnerable to corrosion, especially along grain boundaries of a sintered magnet. This type of corrosion can cause serious deterioration, including crumbling of a magnet into a powder of small magnetic particles. This vulnerability is addressed by adding a protective coating to prevent exposure to the atmosphere. Nickel plating or two-layered copper-nickel plating are the standard methods, although plating with other metals or polymer and lacquer protective coatings are also available.
Contact Online Now!