Cup Magnet with Cylindrical Hole Ø75 mm

/Cup Magnet with Cylindrical Hole Ø75 mm
  • Cup Magnet with Cylindrical Hole
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Cup Magnet with Cylindrical Hole Ø75 mm, Huge Through Hole NdFeB Pot Magnet, Cylindrical hole pot magnet, Rare Earth Hanging Mounting Holding Clamping System Permanent Magnet, Sintered NdFeB Cup Magnets with Cylindrical Hole, Borehole Flat Pot Ring Magnet China Supplier

    Cup Magnet with Cylindrical Hole Ø75 mm Technical
    Material: Neodymium (NdFeB ) and Steel
    Part No.: MPPT-NB75
    Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
    Shape: Pot Cylindrical Hole / Through Hole
    Pot Magnet Size:
    Pot Total Diameter (D): 75 mm
    Pot Bottom Diameter (D1): 10.5 mm
    Pot Countersunk Diameter (D2): 18 mm
    Pot Total Height (H): 17.9 mm
    Tolerance: ±0.1 mm
    Weight: 524 g
    Holding Force: 155 kg
    Maximum Operation Temperature: 80 °C
    Delivery Time: 7-15 days
    Made in China

    Material: Housing steel and Magnetic core sintered neodymium ring magnet.
    Version: Housing, galvanized. Magnet, Ni coated or Zn coated
    Note: Shallow flat pot magnets with cylindrical hole. These magnets are pressed or glued into the receiving holes.
    Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=75 version. They do not impair the attracting function of the magnets in any way.
    Temperature range: max. 80°C.

    Cylindrical Hole Neodymium Pot Magnets or Through Hole Neodymium Cup Magnets by MPCO– Our strong ring neodymium magnets with cylindrical hole could be even stronger! In this category you find our neo pot magnets with hole. The holding core is a strong ndfeb magnet with borehole (Powerful rare earth neodymium permanent magnet) built in a steel pot. Not only will the steel pot keep the magnet safe from damages but also the magnetic force is higher! Because of the steel there is only one side that can be attached. The optimal surfaces are steel and iron. These magnets dimension is D 10mm to 80mm dia, the H is 4.5mm to 19mm. pot magnet with cylindrical hole  These magnetic pots weight is 2g to 641g and The pot coating is Ni-Cu-Ni plating, Zn-plated or Chrome-coated for a durable, quality finish. We offer an extensive holding force range of magnetic lenses with cylindrical hole is lifting up 1kg to lifting up 192kg, it is super strong powerful for mounting and holding. These are the ideal magnets for when intense holding power is required.

    NdFeB Hole Pot Magnets are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness plus total surface area), etc.

    error: Content is protected !!