Custom Separator Bar Magnet with Two Thread Holes

Custom Separator Bar Magnet with Two Thread Holes, Separator Magnetic Filter Bar Roller, magnetic grids, Cleanflow magnets filters, Neodymium Magnetic Tube with Double Eyebolts, Magnet Filter Bar with Special ends, Customized NdFeB Magnetic Filter Separator For Water Treatment, Magnetic Filter Rods Bars Tubes, Permanent Rod Magnets, Industries Magnetic System China supplier

Custom Separator Bar Magnet with Two Thread Holes Specification
Item Magnetic Bar & Rod
Gauss 6000-15000 Gauss
Material Neodymium Magnet+SUS304/316L Pipe
Shape Rod, bar, stick, wand ect.
Working Temp. 80ºC~200ºC
Casing SUS304/316L
Dimension Dia: 16mm, 20mm, 22mm, 25mm, 28mm, 30mm, 32mm,50mm.
Application Industrial filter, food industry, Ceramic industry ect.
Feature Eco-friendly, Green Product, long life.
Performance Permanent, Strong, Rust-proof, Anti-corrosion

Magnetic tubes, also known as magnetic filter tubes, are an essential component in magnetic filtration systems. They offer a simple and effective way to remove ferrous contaminants from dry and liquid products. These magnetic tubes are widely used in food processing, chemical, and pharmaceutical industries where purity and safety are crucial.

The Standard NdFeB Separator Magnet Rods are rated for a maximum recommended operating temperature of around +80 degrees C. The Separator Rods can be produced for higher rated maximum operating temperatures upon request. The maximum operating temperatures available are +80, +100, +120, +150, +180 and +200 degrees C. When working above +180 degrees C, the SmCo separator magnet version may be a better choice as it more powerful than NdFeB above +180 degrees C and can also be used up to +350 degrees C (for note, SmCo versions are 9000Gauss typically at room temperature). Less commonly used Ferrite versions are also available but are much weaker (Ferrite versions are 1500Gauss typically at room temperature but work up to +150 degrees C).  Customized Welding Separator Rod Magnet

The field strength from any magnet will drop with rising temperature – this is normal (the decrease in performance is linked to the characteristics of the permanent magnet used). The field output will return again as it cools (if the maximum operating temperature is not exceeded). Exceeding the maximum operating temperature causes a permanent irreversible drop in performance.

The MPCO Magnetics separator rods are ideal for capturing ferrous contamination. They are capable, particularly with the more powerful units, of capturing ferromagnetic and ferrimagnetic materials as well as materials with permeability noticeably greater than 1, such as some of the paramagnetic and antiferromagnetic materials. For maximum capture the debris really need to get into direct contact with the Magnetic Rods / Magnetic Separator Rods.