Deep Pot Neodymium Magnets with Internal Thread

Deep Pot Neodymium Magnets with Internal Thread, zinc-plated Magnetic core NdFeB deep pot round magnets, magnet system, Magnetic Holding Assemblies & Cylindrical Bar Rod Pot Magnet, Permanent pot magnets China Supplier

Deep Pot Neodymium Magnets with Internal Thread  Item No. MP-DPMZ-Nd series
Material:
Housing, steel.
Magnetic core NdFeB.
Version: Housing, electro zinc-plated.
Note: Shielded system. Deep pot magnets are used for mounting in steel and iron. This requirement is principally stipulated in plant and machine construction.
Can also be used in blind holes.
Size D=50 has 4 magnets Ø18 mm.
Temperature range: max. 80°C.

A deep pot magnet offers high holding forces on parts that are thick and clean with a good surface finish. To make a jig or fixture magnetic, simply drill a flat bottomed hole and a central fixing hole, push the deep pot magnet into it and secure tightly from underneath with a cap screw. The magnets magnetic face can now be ground flush with the surface of the fixture. Deep Pot Magnets are Magnetic Holding Assemblies for use where a very strong surface holding magnet is required. The magnet sits inside a steel case which provides extra strong magnetism on one face only, provides a hole for fixing and also protects the magnet from damage. One of the largest usages of magnets is the application of holding or gripping, the basic principle of the holding or pot magnet is to direct and concentrate the flux from both magnetic poles to one active face. This is usually achieved with steel pole pieces or a steel (brass)-backing cup. The standard selection can be broken down into three material types and there is a great variety of systems available. The Material have Neodymium-iron-boron (NdFeB), Alnico and Samarium-Cobalt (SmCo). The body of Types brass body and steel body. The styles of Types are cylindrical without fitting tolerance h6, pot with fitting tolerance h6, pot with fitting tolerance h6 and internal thread, with internal thread and cylindrical pot with threaded neck. NdFeB Deep Pot Round Magnets with h6 Tolerance & Machinable Magnetic Face

Deep Pot Magnets Pot magnet assemblies are generally used for gripping, clamping and fixture applications. They can be press fit or use tapped hole for mounting. Permanent pot magnets Deep POT magnets are magnetic holding assemblies composed of magnets (Usually NdFeB, SmCo and AlNiCo magnets) and other spare parts, such as metal, plastic, rubber and other components. The magnet sits inside a steel case which provides extra strong magnetism on only one face and protects the magnet from damage.

Neodymium Deep Pot Magnet with Internal Thread drawing