Epoxy Plated Multi-pole Magnetic Ring

/Epoxy Plated Multi-pole Magnetic Ring
  • Epoxy Plated Multi-pole Magnetic Ring
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Epoxy Plated Multi-pole Magnetic Ring, Anisotropic Radially Aligned Multiple Poles Ring Permanent Magnets, Multi-pole Sintered NdFeB Radial Oriented Ring Magnet for Motor and Sensor, Super Strong Radial Rings China Factory

    Epoxy Plated Multi-pole Magnetic Ring Modle No. MPRR-06
    Coating: Epoxy Plated
    Grade: N35, N38, N48, N50, N35M, N38M, N45M, N35SH, N38SH, N42SH, N45SH, N33UH, N35UH
    Application: Motor, Rotor, Sensor, Actuator and etc.
    Our multipole ring magnet products are custom designed for your application requirements.
    Our teams of sales and engineering professionals are able to custom create a specific multipole ring magnet to meet your most demanding application requirements. To discuss your needs for multiple ring magnet solutions, contact us.

    sintered neodymium multipole ring magnet is a new type of ring magnet, produced by special technology. By this technology, surface magnetic flux can reach top level, about 50%-100% higher than the arc magnets and radial ring magnets. The surface flux is distributed by sine wave shape. Because of its high surface gauss, it can remarkably raise the efficiency of motors efficiency, and it also helps motor to be light-weight and save raw materials.These make it to be a good choice for high-performance motors. multi-pole radial magnetic ring for sensor

    The advantages are significant:
    The cylindrical shape allows smaller mechanical tolerance compared to segment magnets
    Motor assembly is made much easier; installation of one or more rings versus gluing arcs into place.
    Currently attainable qualities: 35H, 40H, 45H, 38M, 35SH, 38SH, 42SH, 35UH, 40UH
    Radial sintering may prevent so-called “weak spots”
    Homogeneous flux of the poles
    Uniformity of the magnetic field is significantly better than that of segment magnets
    Magnets are multi-poled – thus the ring does not compromise the magnetic properties
    Ring magnets offer substantial cost savings on assembling the rotor
    No additional rings or protecting cases are required for fixation
    Different types of magnetization are possible: diametrical, multipolar as well asso called “skewed” magnetization
    This ring provides high cost-effectiveness as well as better motor performance (as compared to the usual segment magnets)
    The radial orientation results in a super strong magnet by virtue of superior metallurgy developed specifically to BE radially oriented.

    Epoxy Plated Multi-pole Magnetic Ring Introduction:
    Radial ring is whole radial oriented ring magnet, it can be magnetized as multi-pole, skewed and uni-pole magnetized. The ring mainly used as induction magnet for motors. It can improve the motors’ performance and property. It is the future development tendency of motor magnets. MPCO is one of the best sintered NdFeB ring magnet manufacturer in China.

    Advantage:
    ● Assembling easier.
    ● Mechanical precision better.
    ● Stable magnetic property.
    ● Improve the motor performance.

    Sintered NdFeB Radial Multipole Ring Magnet GRADES:

    Grade Remanence
    Br(kGs)
    Coercivity
    Hc(kOe)
    Intrinsic Coercivity
    Hcj(kOe)
    Max Energy Product
    (BH)max
    Operating Temp.
    °C
    N35 11.7-12.2 ≥10.9 ≥12 33-36  (MGOe) 80
    N38 12.2-12.5 ≥11.3 ≥12 36-39  (MGOe) 80
    N48 13.8-14.2 ≥11.6 ≥12 46-49  (MGOe) 80
    N35M 11.7-12.2 ≥10.9 ≥14 33-36  (MGOe) 100
    N38M 12.2-12.5 ≥11.3 ≥14 36-39  (MGOe) 100
    N45M 13.2-13.8 ≥12.5 ≥14 43-46  (MGOe) 100
    N35SH 11.7-12.2 ≥11.0 ≥20 33-36  (MGOe) 150
    N38SH 12.2-12.5 ≥11.4 ≥20 36-39  (MGOe) 150
    N42SH 12.8-13.2 ≥12.4 ≥20 40-43  (MGOe) 150
    N45SH 13.2-13.8 ≥12.6 ≥20 43-46  (MGOe) 150
    N33UH 11.3-11.7 ≥10.7 ≥25 31-34  (MGOe) 180
    N35UH 11.8-12.2 ≥10.8 ≥25 33-36  (MGOe) 180
    error: Content is protected !!