Push to Open Magnetic Touched Latches Cupboard Door, Magnetic Pressure Catch, Magnetic Touch Latch Single Round Pin, Kitchen Cupboard Wardrobe Cabinet Latch Magnet, ABS Plastic Housing Surface Mounted Catches, Small Black Magnetic Touch Latch Push To Open Drawer Cabinet Door Catch Lock, Magnetic Closure, Concealed Tap-in Magnetic Closer Catcher, door stopper, magnetic cabinet catches and […]
Extremely Strong Plastic Organization Magnet, Plastic Housing Rectangular Planning Board Magnetic Blackboard NdFeB Magnets, Organisation Magnets, Plastic Covered Office Whiteboard Glassboard Permanent Magnets, Neodymium Magnet in ABS Plastic Housing, Fridge Magnets China Supplier
Extremely Strong Plastic Organization Magnet Features:
Item No.: MP-BONM01
Material: Neodymium, Iron, Boron (NdFeB) + Plastic (Polypropylene)
Magnet Grade: N38, N40, N42, N45
Magnet Shape: Block, Rectangular
Color: White, Blue, Red, Yellow, Black, Green, (or customer’s required)
Total lenght (L): 55 mm
Total width (B): 22.5 mm
Total height (H): 8.5 mm
Max Operating Temp: 80ºC
Weight: 0,0092 kg
Tolerances: ±0.01 x ±0.01 mm
Magnetization Direction: Magnetized Axial Through Thickness (Poles on Flat Ends)
Magnet size is prior to plastic coating
These is our popular neodymium block magnet with a protective plastic coating. The plastic coating is very much durable layer of plastic, which protects the magnet from impact damage and corrosion. The plastic coating is very water resistant, but not recommended for underwater use, as the rubber seal is not guaranteed waterproof. The plastic also helps to limit slipping on smooth surfaces.
Plastic Housing Rectangular Office NdFeB Magnets Round magnets with flat top – equipped with neodymium-iron-boron magnets
These magnets are widely used in planner and organisational systems. The high adhesion and a printing with company logo or icons expand the promotional items.
extremely strong organization magnet with plastic coating.
the elongated memomagnet were two neodymium scheibenmagnete wechselpolig installed, allowing a higher power is achieved. to remove directly from a metallic surface, you need a certain strength. please don’t underestimate it.
on a painted metalltüre holds the magnet 22 a4 sheets.
The plastic coating is about 1mm thick itself, according to the final size, the magnet size should change to be 2mm less. But it will make the magnet less stronger, if you choose plastic coating, you may have to choose a stronger magnet than your original design. In addition, the plastic coating will need a tooling charge, but different colors can be produced by a same mold. rectangular office ndfeb magnets
We welcome your own design to make a custom plastic magnet for your application.