Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Flat NdFeB Pot Magnets Ø12 X 5mm, Round Base NdFeB Magnet, Neodymium Flat Steelpot, Glue-in Pot Magnet, Sintered Neodymium Cup Permanent Magnet, Rare Earth Mounting Magnet, flat Grapples, Magnetic Lens, cap magnet, flat cup magnet, flat gripper, flat pot magnet, neodymium flat pot China supplier factory
Flat NdFeB Pot Magnets Ø12 X 5mm Technical
Material: Neodymium (NdFeB ) and Steel
Part No.: MPPT-NO12
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Flat / without bore
Pot Magnet Size:
Pot Total Diameter (D): 12 mm
Pot Total Height (H): 5 mm
Tolerance: ±0.1 mm
Weight: 5 g
Holding Force: 2 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
rare earth mounting magnet Features:
1.Strong magnetic force
2.Ni or Zn coated surface to avoid corrosion
3.Can be used in water environment
Material: Housing steel and Magnetic core sintered neodymium disc magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow flat pot magnets without threaded bush. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=16 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.
Neodymium Flat Cup Magne / Shallow Pot Magnet
Introduction neodymium mouting magnet
1, Flat pot magnets are low profile for applications where height is limited.
2, They have a clearance hole through and a countersunk on the magnetic face to accept a countersunk screw.
3, The range of Shallow Pot Magnets is wide and shallow, the north and south poles are on the same plane.
4, Because the gap between the poles is narrow, they have a shallow flux field, these magnets are ideal for limpet type gripping applications.
5, Each magnet in the range is manufactured with a standard M6 thread for building into jigs and fixtures, fitted with a J bolt.
6, Surface can be red painted, or coated with nickel, zinc or Chrome. Disc holding magnets can be fixed onto or sunken into steel surfaces without any loss of performance.
Contact Online Now!