High Temperature SmCo Arc Insulated Magnet

High Temperature SmCo Arc Insulated Magnet, The Lowest Eddy Current Losses Arc Laminated Rare Earth Permanent Magnets, Segment Laminated Magnet Samarium Cobalt,  layered magnet, split magnet and segmented magnet

High Temperature SmCo Arc Insulated Magnet  Item No. MPCO-LAMS  series
Customzied Specific Requirements
Know as Lamination Magnetic Core
OEM or ODM service: Accept
Dimension: Customized size
Custom Grade: SmCo5,  Sm2Co17
Magnetization direction: Thickness, Length, Axially, Diametre, Radially, Multipolar
Surface Treatment: UNCOATED, Silver, Gold, Zinc, Ni-cu-Ni. Epoxy etc.
Tolerance: +/-0.02 – 0.05mm
Application: SmCo rare earth permanent magnets are widely applied in Auto, energy-efficient Motors and Generators, Machinery, Audio/Video and Communication Equipment, Medical Device(MRI), Office Automation, Magnetic Separator, etc.

What is the Advantages of Laminated Magnet?
According to many simulation cases and actual products, the magnet segmentation technique has excellent performance to prevent the eddy current. With the increase of segment, the eddy current losses of permanent magnet significantly decreased. Magnet segmentation technique has been already applied in the NdFeB and SmCo magnet.

Stable working at temperature up to 200˚C
Consistency of insulation guaranteed
Insulation layer ranging 25 -100 μm
Magnet layer with thickness from 0.5mm and up in a wide of shapes like block, loaf, segment and wedge
Magnet material in SmCo or Neodymium

Samarium Cobalt (or SmCo) magnets are strong permanent magnets made of an alloy of samarium and cobalt. They are known for their high magnetic strength, exceptional temperature resistance, and reliable performance without oxidation protection. As a result, they are more suitable for certain applications than Neodymium magnets.

Samarium Cobalt magnets offer strong resistance to demagnetization. All Samarium Cobalt magnets cannot be formed with conventional drilling, turning or milling processes, and must be ground before they are magnetized. Additionally, large or complex assemblies are usually magnetized prior to assembly. Standard tolerances for Samarium Cobalt magnets are +/-.005 for ground dimensions.

Samarium Cobalt magnets (SmCo) may be weaker than NdFeB magnets at room temperature but SmCo will often outperform NdFeB above +150 to +180 deg C (subject to the application and grade). SmCo magnets are ideal for aerospace, automotive, sensor, loudspeaker, motor and military applications. In mission critical applications they are an ideal first choice. SmCo magnets offer minimal change in magnetic output over a small temperature change (with far less variation than NdFeB or ferrite; only Alnico is better).

The consumption of motor is the greatest among the rotating machinery. The eddy current losses are one of the worst enemies to high-speed rare earth permanent magnet motor. The eddy current will give rise to the temperature of the rare earth permanent magnet, then the magnet will be demagnetized, therefore influence the work efficiency of the motor. As the metallic material, the rare earth permanent magnet has lower electrical resistance, and it also become the direct source of eddy current losses. N35H Arc Segment NdFeB Magnet for Hazardous Duty Motors