15 x 10 x 5mm NdFeB Rectangular Magnet N40M Ni, Rare Earth Super Strong Sintered NdFeB Block Magnet for Motor Sensor Rotor Toy, Nickel Coating Licensed Neodymium Permanent Magnets China Supplier 15 x 10 x 5mm NdFeB Rectangular Magnet N40M Ni Technical Specifications: Item: NBN40M-15-10-5 Grade: N40M Material: Neodymium (NdFeB) Plating: Nickel Shape: Block, Rectangular, Rectangle, […]
Huge Magnet Neodymium Countersunk Pot Ø75 mm, Super Strong Neodymium Pot Magnet w/ Counterbore, Strong Screw Cap Permanent Magnets, Round Base Magnet, Rare Earth Neodymium Iron Boron Hanging Mounting Holding Clamping System, N50 magnets, magnetic fixture holder China supplier & manufacturer
Huge Magnet Neodymium Countersunk Pot Ø75 mm Technical
Material: Neodymium (NdFeB ) and Steel
Part No.: MPPT-NA75
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Ring / Disc Magnet with Countersunk hole (90° sunken hole)
Pot Magnet Size:
Pot Total Diameter (D): 75 mm
Pot Bottom Diameter (D1): 10.5 mm
Pot Countersunk Diameter (D2): 21 mm
Pot Total Height (H): 17.8 mm
Tolerance: ±0.1 mm
Weight: 480 g
Holding Force: 163 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
Neodymium Countersunk Pot Features:
1.Strong magnetic force
2.Ni or Zn coated surface to avoid corrosion
3.Can be used in water environment
Material: Housing steel and Magnetic core sintered neodymium countersunk magnet.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow flat pot magnets with sunken hole. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=80 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.
NEODYMIUM with higher operating Temperatures and Intrinsic Coercive Forces are available in these Pot Magnets. Samarium Cobalt and Stainless shells and shields are also manufactured. The all Stainless Pot Magnets, for both Alnico and Neodymium, are a Level I or II food grade unit.
All MPCO Pot Magnets are Centerless Ground after pressing to ±0.003″. The standard tolerance on the length is ±0.015″. Tighter tolerances are available upon request.
We will manufacture a custom magnet for your application at a stock magnet cost.
Various Tap Styles and Tap Depths.
Insulated (Brass Sleeved).
Shoulders and Machined Features on shell.
Protruding Pot Magnets.
Metric and Custom Sizes
countersunk neodymium pot magnet Options:
NdFeB, Ferrite, SmCo, Alnico material available
Surface can be Zn ,Ni, Cr ,Painting, Rubber Cover etc
Custom made also available.