Plastic HDPE Case Magnetic Door Latch Catch, ABS Plastic Housing Surface Mounted Catches, Rectangle Screw-On Embedded Square Magnetic Holder Catch for Screw Fixing, Cabinet Door magnetic touch, Magnetic Closure, Concealed Tap-in Magnetic Closer Catcher, rectangle door stopper, neodymium magnetic cabinet catches and latches, Superior Panel & Cabinet Magnets Hardware Accessories China Factory Supplier Plastic HDPE […]
Industrial Multipole Neodymium Magnet Assembly, Industrial Motor Permanent Magnet Assembly, Radially Magnetized Magnetic Assemblies, Multipole Rotor Magnet Assembly, High Torque Neodymium magnet Magnetic Rotor for low-speed permanent magnet generator
Industrial Multipole Neodymium Magnet Assembly Features:
Material NdFeB Magnet, steel
Coating Passivation & Phosphating, Ni, Ni-Cu-Ni, Zn, CR3+Zn, Tin, Gold, Sliver, Epoxy , Teflon and more.
Magnetization Direction Radially Magnetized, Axially Magnetized, etc.
Grade N35-N52 (M.H.SH.UH.EH.AH)
Size Customized Size
Used Industrial Application
A magnetic assembly incorporates magnet alloy and non-magnet material. Magnet alloy is very hard and even simple features are difficult to incorporate into the alloy. Mounting and application specific features are easily incorporated into the non-magnetic materials which usually form the housing or magnetic circuit elements. The non-magnet elements will also buffer the brittle magnet material from mechanical stress and increase the over-all magnetic strength of the magnet alloy.
Enhanced Magnetic Strength:
Magnetic assemblies typically have higher magnet force when compared to a magnet by itself because the flux conducting elements (steel) of the assembly are often times an integral part of the magnetic circuit. These elements, by the use of magnetic induction, will enhance the assembly’s field and focus it to the region of interest. This technique works best when using the magnetic assembly in direct contact with the work-piece. Even small gaps can dramatically impact the magnetic force. These gaps can be an actual air-gap or any coating or debris which stands the assembly off of the work-piece. Brushless Permanent Magnet Stepper U-type Linear Motor