KD310 3D Printer Magnetic Socket Connection Ball Steel Brass Rod End with Threaded Hole

KD310 3D Printer Magnetic Socket Connection Ball Steel Brass Rod End with Threaded Hole, KD-310 Rare Earth Ball Joint Magnets Nickel Plated Permanent NdFeB Magnetic Ball Joint Assemblies, Magnetic Pole Position, Magnetic Universal Joint Fitting, Magnetic holding device used for cameras, light fixtures, optical devices w/ Rare Earth Magnets China Supplier

KD310 3D Printer Magnetic Socket Connection Ball Steel Brass Rod End with Threaded Hole DETAILS
Grade: KD310  / KD-310  (Chrome / Nickel-Plated)
Measurements:
Cylinder Diameter: 10mm
Cylinder Height: 20mm
Ball Diameter: 10mm
Holding Force: ~2kgs

Magnetic ball joints
Maximum operating temperature: 100 °C
Tolerances: KL/GL ± 0.5 mm, D Diameter Polished, nickel-plated tolerance H6 (exception type K8) sonst General tolerance 0.1 mm, balls
All dimensions in mm
Possible Special designs: All sided galvanised surface treatment higher operating temperature max 200 °C, (not Type K8)

Magnetic Ball Joints is a holding Device which has flexible joints with a diameter 8/10/13/16/25mm steel ball held by powerful rare earth magnets contained in the Brass or Aluminum Rod. And the magnetic ball joints allow the steel ball a full 360°rotation on a 180°axis. This caused even if the ball comes off from the magnet cylinder, no damage can be made and the joints can work just as well as before when reset.

Magnetic Universal Ball Joint is a holding Device which has universal flexible joint with a diameter 10mm to 25mm steel spheric ball holding by Strong Neodymium rare earth magnet contained in the Brass/Aluminum Rod end. Thus the magnetic ball joints allow the steel ball a full 360° rotation on a 180°axis. The structure make sure even if the magnetic ball run away from the magnet cylinder, no damage will happen and the ball joint can get back to work after reset. Inter screw hole in the bottom of the rod end for fix or entension connection

Normally, the sphere ball of magnetic ball joint are chromium plated, after the observation of the used ball joints, Now we improve the surface coating of ball, Nickel Coating will be used for a choice to improve resistance of abrasion.

Due to the use of high energy rare earth magnets, Universal magnetic ball jointshave a very strong holding force. the Holding force of the joint is strong enough to hold the optical systems of cameras, lighting fixtures, laser units or 3D printer without requiring additional mechanical fixer. And there are many models of the magnetic ball joints with threaded, showed in below diagram.

Specifications

​3d printer socket connection Steel ball Brass rod end with thread hole permanent universal magnetic ball joint ,  Nickel-Plated K-8 K8 3D Printer Magnetic Ball Joint

Magnetic Joint Ball Dimension