KD310 Nickel-Plating Permanent NdFeB Magnetic Ball Fitting

KD310 Nickel-Plating Permanent NdFeB Magnetic Ball Fitting, KD-310 Rare Earth Ball Joint Magnets Nickel Plated Permanent NdFeB Magnetic Ball Joint Assemblies, Magnetic Pole Position, Magnetic Universal Joint, Magnetic holding device used for cameras, light fixtures, optical devices w/ Rare Earth Magnets China Supplier

KD310 Nickel-Plating Permanent NdFeB Magnetic Ball Fitting DETAILS
Grade: KD310  / KD-310  (Chrome / Nickel-Plated)
Measurements:
Cylinder Diameter: 10mm
Cylinder Height: 20mm
Ball Diameter: 10mm
Holding Force: ~2kgs

Magnetic ball joints
Maximum operating temperature: 100 °C
Tolerances: KL/GL ± 0.5 mm, D Diameter Polished, nickel-plated tolerance H6 (exception type K8) sonst General tolerance 0.1 mm, balls
All dimensions in mm
Possible Special designs: All sided galvanised surface treatment higher operating temperature max 200 °C, (not Type K8)

Magnetic Ball Joints is a holding Device which has flexible joints with a diameter 8/10/13/16/25mm steel ball held by powerful rare earth magnets contained in the Brass or Aluminum Rod. And the magnetic ball joints allow the steel ball a full 360°rotation on a 180°axis. This caused even if the ball comes off from the magnet cylinder, no damage can be made and the joints can work just as well as before when reset.

Magnetic Ball Joints use powerful Rare Earth Magnets to hold equipment in place and enable the periodic adjustment of the direction or position of the equipment as required. They can swivel or rotate in almost any direction and are commonly used to fix lighting, CCTV Monitors, Lasers, Robotic Joints and Medical equipment in surgeries and laboratories. Using Magnetic Ball Joints eliminates the need for permanent attachment with screws or bolts and allow instant repositioning of devices without the need for tools or technicians. Copper Plated K8 Magnetic Ball Joint

Since the magnetic ball joint is electro-conductive, rapidrelease and rotatable electrical connections can be made with such a system. This is of advantage, for instance, in modern low-voltage lamps. Rapid-release connections for test fixtures are also possible. In lifting linkages a predetermined breaking point can be provided, or sideways movements compensated. Due to the use of high-energy rare-earth magnets, magnetic ball joints types KD have a very strong holding force. The resulting displacement force of the ball is strong enough to hold the optical systems of cameras, lighting fixtures or laser units without requiring a mechanical fixation.

This novel magnetic ball joint has phenomenal holding power for up to 1kg of attached weight wile permitting the ball a full 360° rotation on a 180° axis. You can freely orient your equipment to an infinite number of positions within this rotation. This is made possible by the combination of a steel ball (1mm diameter) and a powerful rare earth magnet contained in the magnet cylinder (8 x 12mm). Convenient M4 attachment sites are provided on both the ball (male) and the magnet base (female).  Magnetic Ball Joint Assembly K8 Chrome Plated

For use with micromanipulators for the positioning and holding of optical instruments including various lighting sources and lasers, pipettes and any small parts that would benfit from the flexibility offered by this new magnetic ball joint. K8 Rare Earth Ball Joint Magnets Brass Plated,  K8 Magnetic Sphere Joint Assembly with N50 NdFeB Magnet

Magnetic Joint Ball Dimension