Magnetic Chutes

Magnetic Chutes with Round Inlet and Outlet, Self-Cleaning Plate Housing Magnets, Magnetic Separators, chute magnets, stainless steel Plate Magnet Housing, Separator Plate Pipe Magnets

Magnetic Chutes with Round Inlet and Outlet Item No. MP-MC150 /200 /250 series – Magnetic Chute looks like a feed pipe with a magnetic plate on one or both sides by hinges and latches. This is designed for installation in angled line or slant line. Simply remove part of chute and replacing with magnetic chute. For separation of all dry powder or granular materials, the chute separator is a nice choice since there isn’t any impediment inside the housing.

Construction:
• 100% stainless steel enclosed construction
• Ferrite magnets or rare earth magnets
• Heavy duty latches, hinges, and handle for easy installation and maintenance
• All welded construction for rugged use
• Four standard strengths to choose from, and in widths to match most chutes

Magnetic Chute is usually suitable for removal Medium to fine contaminants. When product come into the chute, it stream down to the plate magnet. The iron contaminants attracted by the magnetic field flux while products pass directly.

Another design of magnetic chute is for vertical line, something like Hump magnet which requires sufficient height to install.
However, This magnet separator is ideal option when allowable mount space is very limited.
Deep reach magnet is applied to remove medium to large contaminants, such as nuts, bolts, nails which will damage the following equipment seriously. So it is usually installed at the fore-end of production process, such as material inlet position. Two powerful plates fixed on the opposite sides of housing to capture contaminants out of the passing products. An angle baffle placed in the center of inlet to compel products toward two opposite plates.

Features:
1. Finishing: The housing can be sand blasted or Brushed finish
2. Material: All the materials are 100% stainless steel.
3. Magnet: Either rare-earth magnet or Ferrite Magnet
4. Type of connection: Round or Square is available to your existing line.
5. Customer designs, specifications can be fulfilled.

Chute Magnets and Pipe Magnets are fitted with very powerful permanent magnetic plate doors.
Typical installations are in vertical down pipes and chutes.
Application is typically for Separation of ferrous contamination from raw materials.
These magnets are used most commonly in food, animal feed and plastics industries.
Apart from manual cleaning requirement, these magnets are maintenance free and extremely effective for tramp iron removal. Chute Magnet with Square Inlet and Outlet

Plate Housing Magnet Drawing