Mini Round Holding Permanent Electro-Magnet 12*12mm, Small Flat-Faced Magnets, Holding Solenoid with Permanent Magnet, Small Mini Electro Holding Magnets, Round Solenoid Lifting Electro-magnet for Industrial, Circular Electric Lifting Electro Strong Magnet, Electronically Switchable Permanent Magnets, clamping, locking or holding Electromagnets / standard Solenoid Electromagnet China Supplier
Mini Round Holding Permanent Electro-Magnet 12*12mm Feature:
Power on to hold, power off to release
– Size: D12 x 12mm
– Power: 12VDC , 1W
– Holding force: 1.0kgs,
– Duty cycle: 100%
– Different models are available, holding force: 1kgs – 200kgs.
– Application: electronic machine, package machines, mechanical hands.
Product | Holding Electromagnet | Insulation Class | B |
Model | MPP-1212 | Service Life | 500 Thousand |
Voltage | DC12V | Lead time | 5 days if have stock |
Power | 1.0W | Sample Order | Acceptable |
Holding Force | >1.0kgs | MOQ | 1 pc |
Duty Cycle | 100% | Warranty | 1 Year |
Lead Wire | 250mm | Port of Loading | Ningbo, Zhejiang |
Electromagnetic holding magnets:Round and Rectangular Flat-Faced Electromagnets are available in a variety of sizes. Flat-Faced magnets should only be used on flat, smooth material where the entire magnet face is in contact. Can be used in manually operated or automated applications. Magnets listed utilize D.C. current. Pounds pull ratings are maximum on low carbon steel at magnetic saturation.When activated provides a clamping, locking or holding mechanism , Holding solenoids with power supply 24 VDC. These types of solenoids are used in manipulators, locking systems, etc. Magnetic force is generated by permanent magnet inside – when power supply is swithced off. After switching the power supply on (right polarity is required), the electromagnet releases the load. The electromagnets have high holding force and can be combined to multiple systems. These types are suitable for applications where high safety level is required against power failure. 24V 50N 5kgs Round Flat-Faced Electromagnet 20*15mm
The holding electromagnets (electromagnetic and electropermanent) are used to attract and hold ferromagnetic pieces.
The maximum force efficiency is achieved with the piece to be hold above the attraction’s face and in direct contact with both poles (outside pole and inside pole). Permanent Electro-Magnet
It is not recommended use holding electromagnet in applications that an air gap>0.2mm is required.
The retention force will fall down exponentially when the air gap increases (as can be seen in the data sheet of each product).
Electro-permanent holding magnets with integrated permanent magnet:
A ferromagnetic part is held in place on the holding magnet thanks to a permanent magnet that is integrated in the holding magnet and continues to hold the part when no current is applied. 40kgs Electromagnetic Holding Magnets 40*26mm
The magnetic field created when the coil is powered is opposite to that of the permanent magnet and cancels out its action. This releases the ferromagnetic part located on the attraction surface.
The force induced by the permanent magnet is present again when the supply voltage is interrupted, thus attracting the ferromagnetic part.
Related