N33SH Neodymium Rare Earth Segment Magnet

N33SH Neodymium Rare Earth Segment Magnet, High Temperature Resistant NdFeB Magnets, Nickel Plated Powerful Rare Earth Neodymium Segment High Temperature Magnet, High-performance Sintered Neodymium Arc permanent magnet for rotor motor and wind turbine

N33SH Neodymium Rare Earth Segment Magnet Features:

Part No.: NSGN33SH-52
Dimensions:  Required Confidentiality  CUSTOMER SUPPLY DRAWING
Shape: Arc / Segment
Grade: N33SH
Thickness: 6mm
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB
Fixing: Araldite/Loctite
Magnetization Direction: North on outside face
Max. Operating Temperature: 150 °C

Applications of Neodymium Magnets
Magnetic separators
Linear actuators
Microphone assemblies
Servo motors
DC motors (automotive starters)
Computer rigid disc drives, printers and speakers

Tolerances
For as-pressed material, tolerance on the thickness (direction of magnetization) is +/– .005”. Other dimensions are +/– 2.5% or +/– .005”, whichever is greater.
According to International Magnetics Association/Magnet Materials Producers Association (IMA/MMPA) standards, visual imperfections such as hairline cracks, porosity and minor chips are commonly found in sintered magnets. A chipped edge is considered acceptable if no more than 10% of the surface is missing. Cracks are acceptable as long as they do not extend across more than 50% of the pole’s surface.

Attributes of Neodymium Material
Very high resistance to demagnetization
High energy for size
Good in ambient temperature
Moderately priced
Material is corrosive and should be coated for long term maximum energy output
Low working temperature for heat applications, but higher levels of heat resistance materials are being introduced periodically

Machining
Since neodymium magnet material is prone to chipping and cracking, it does not lend itself to conventional machining methods. However, neodymium can be abrasively ground, but only with the use of liberal amounts of coolant. The coolant minimizes heat fracturing and the risk of fires caused by oxidized grinding dust. N35UH Segment NdFeB High Temperature Resistant Magnets

Magnetizing and Handling
Neodymium magnets are very brittle and very strong magnetically. Therefore, it is crucial to handle these magnets with extreme care to avoid personal injury and damage to the magnets. Fingers can be severely pinched between attracting magnets. Magnets can chip if allowed to “jump at” an attracting object. It is highly recommended that when constructing rare earth magnetic assemblies, they be magnetized after assembly.

Motor Magnets / Rare earth magnets are mostly used in motor, such as permanent magnet D.C. motors, wound field D.C. motors, gear motors, custom D.C. motors. generator or electric motor; electrical machinery.
Segment magnets are of the largest quantity we made now. arc magnets are also the most popular motor magnets.
This paper analyzes the Direct Torque Control ( DTC) theory of PMSM.
We measure the temperature of the motor.
The back EMF constant and torque constant are analyzed. The calculating formulas are gived.
This paper introduces a multi-motor control system of the electric cleaner.
In this thesis, how to design a brushless DC motor control chip is discussed in detail.
Intelligent drive motor control system and intelligent charging control system.