NdFeB Magnetic Separation Bar Φ25mmX700mm, 14000 Gauss Neodymium Rectangle Round Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Separation Rods, Round Bar Shape Magnetic Filter Tubes, Permanent Separator Rod Magnets, Easy Clean Magnetic Probe filter bar magnets, Grid Magnet China supplier
NdFeB Magnetic Separation Bar Φ25mmX700mm , Item No. MPNBM-26 TECH SPECS:
Voice |
Name |
Symbol |
SI |
CGS |
Shape |
Diameter |
D |
25 mm |
2.5 cm |
diameter |
d |
10 mm |
1 cm |
Length |
L |
700 mm |
70 cm |
Screw |
M |
6 mm |
0.6 cm |
direction of magnetization |
M |
A |
Weight |
Net |
2.577 kg |
2577 g |
Surface treatment |
Polish |
μm |
|
Magnetic
Characteristics |
Surface magnetic flux density |
B |
1400 mT |
14000 Gauss |
Suction force
Adhesion |
F |
kgf |
gf |
Magnetic flux density on load point |
Bd |
mT |
Gauss |
Total flux |
φo |
Wb |
Mx |
Permeance Coefficient |
Pc |
Pc |
|
Maximum usage temperature |
Tw |
100 ℃ |
Minimum usage temperature |
Tw |
℃ |
Material properties |
Materialsymbols |
Magnetic Bar |
316 |
|
remanence |
Br |
– mT |
– kG |
Coercivity |
Hcb |
– kA/m |
kOe |
Intrinsic coercive force |
Hcj |
– kA/m |
kOe |
Maximum energy product |
BH |
– kj/m3 |
MGOe |
Temperature coefficient |
Br |
– %/℃ |
|
Hcj |
– %/℃ |
Heat resistant temperature |
Tw |
– ℃ |
Curie temperature |
Tc |
– ℃ |
Density |
ρ |
– kg/m3 |
Remarks |
REACH RoHS Directive |
magnetic tubes (magnetic rods) are a simple low-cost form of magnetic separation. Used in a variety of industries from food or plastics processing to chemical and powder processing, they can be easily installed into machinery or assembled according to the wishes of the customers. Encased in 316 stainless steel tube 25.4mm diameter, they are manufactured with high intensity rare earth magnets (up to 12,000 gauss). We manufacture them specifically to the length requested by the customer. The sealed stainless steel ends can be left blank or drilled and tapped for fixing purposes. Tube Rod Neodymium Magnet Φ25mmX500mm
The Standard NdFeB Separator Magnet Rods are rated for a maximum recommended operating temperature of around +80 degrees C. The Separator Rods can be produced for higher rated maximum operating temperatures upon request. The maximum operating temperatures available are +80, +100, +120, +150, +180 and +200 degrees C. When working above +180 degrees C, the SmCo separator magnet version may be a better choice as it more powerful than NdFeB above +180 degrees C and can also be used up to +350 degrees C (for note, SmCo versions are 9000Gauss typically at room temperature). Less commonly used Ferrite versions are also available but are much weaker (Ferrite versions are 1500Gauss typically at room temperature but work up to +150 degrees C). Filter Separation Magnet Rod Φ25mmX400mm
The field strength from any magnet will drop with rising temperature – this is normal (the decrease in performance is linked to the characteristics of the permanent magnet used). The field output will return again as it cools (if the maximum operating temperature is not exceeded). Exceeding the maximum operating temperature causes a permanent irreversible drop in performance. Rare Earth Magnetic Rod Tube Φ25mmX450mm
The MPCO Magnetics separator rods are ideal for capturing ferrous contamination. They are capable, particularly with the more powerful units, of capturing ferromagnetic and ferrimagnetic materials as well as materials with permeability noticeably greater than 1, such as some of the paramagnetic and antiferromagnetic materials. For maximum capture the debris really need to get into direct contact with the Magnetic Rods / Magnetic Separator Rods. Magnetic Separation Tube Neo Bars Φ25mmX600mm
Related