Neo Separator Magnet Rods Φ23mmX200mm

Send Inquiry

Primary Competitive Advantages:

We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004

All Magnetic Grade for Sintered & Bonded Magnets

Our Quality Guaranteed

We Ship Worldwide

Small Orders Accepted

OEM Design Approvals

All Payment Accepted

GET A Quote for Neo Separator Magnet Rods Φ23mmX200mm

Neo Separator Magnet Rods Φ23mmX200mm, 12000 Gauss Neodymium Rectangle Round Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Separation Rods, Round Bar Shape Magnetic Filter Tubes, Permanent Separator Rod Magnets, Easy Clean Magnetic Probe filter bar magnets, Grid Magnet China supplier

Neo Separator Magnet Rods Φ23mmX200mm , Item No. MPNBM-14 TECH SPECS:

Voice	Name	Symbol	SI	CGS
Shape	Diameter	D	23 mm	2.3 cm
	diameter	d	10 mm	1 cm
	Length	L	200 mm	20 cm
	Screw	M	6 mm	0.6 cm
	direction of magnetization	M	A
	Weight	Net	0.623 kg	623 g
	Surface treatment	Polish	μm
Magnetic Characteristics	Surface magnetic flux density	B	1200 mT	12000 Gauss
	Suction force Adhesion	F	kgf	gf
	Magnetic flux density on load point	Bd	mT	Gauss
	Total flux	φo	Wb	Mx
	Permeance Coefficient	Pc	Pc
	Maximum usage temperature	Tw	100 ℃
	Minimum usage temperature	Tw	℃
Material properties	Materialsymbols	Magnetic Bar	316
	remanence	Br	– mT	– kG
	Coercivity	Hcb	– kA/m	kOe
	Intrinsic coercive force	Hcj	– kA/m	kOe
	Maximum energy product	BH	– kj/m3	MGOe
	Temperature coefficient	Br	– %/℃
	Temperature coefficient	Hcj	– %/℃
	Heat resistant temperature	Tw	– ℃
	Curie temperature	Tc	– ℃
	Density	ρ	– kg/m3
Remarks	REACH RoHS Directive

The majority of Separator Magnet Tubes contain NdFeB Rare Earth magnets but versions containing Ferrite magnets, SmCo Rare Earth magnets and Alnico magnets also exist. The NdFeB versions come as standard strength and high intensity strength as the two main options. Our Food Grade Range are all encased in a food quality stainless steel (usually SS304 but SS316 is also offered). By having a food quality stainless steel casing, the Separator magnet Rods are corrosion resistant and easy to clean. Neodymium Separator Magnet Tubes Φ23mmX100mm

The “standard” Separator Rod is SS304 encased, contains NdFeB magnets, offers 10kGauss (1 Tesla) at multiple locations along its length, is 25mm in diameter available in lengths varying from 50mm up to 500mm in 50mm increments, has M8 tapped holes at the ends and is rated to work in temperatures up to +80 deg C. We can offer variations from this standard design as well.

The Standard NdFeB Separator Magnet Rods are rated for a maximum recommended operating temperature of around +80 degrees C. The Separator Rods can be produced for higher rated maximum operating temperatures upon request. The maximum operating temperatures available are +80, +100, +120, +150, +180 and +200 degrees C. When working above +180 degrees C, the SmCo separator magnet version may be a better choice as it more powerful than NdFeB above +180 degrees C and can also be used up to +350 degrees C (for note, SmCo versions are 9000Gauss typically at room temperature). Less commonly used Ferrite versions are also available but are much weaker (Ferrite versions are 1500Gauss typically at room temperature but work up to +150 degrees C).