Neodymium Multi-poled Radial Ring, Multipolar Ring NdFeB Magnets, Epoxy Plated Multi-pole Magnetic Ring, Rare Earth Sintered NdFeB Multi-poled Radial Oriented Ring Magnet for Motor and Sensor, Superior Strong Radial Rings, magnetic solutions China Supplier
Neodymium Multi-poled Radial Ring Magnets Modle No. MPRR-08
Coating: Epoxy Plated
Grade: N35, N38, N48, N50, N35M, N38M, N45M, N35SH, N38SH, N42SH, N45SH, N33UH, N35UH
Application: Motor, Rotor, Sensor, Actuator and etc.
Our multipole ring magnet products are custom designed for your application requirements.
Our teams of sales and engineering professionals are able to custom create a specific multipole ring magnet to meet your most demanding application requirements. To discuss your needs for multi-pole magnetic ring solutions, contact us.
These Neodymium (NdFeB) rings are revolutionizing the permanent magnet space for synchronous motors, stepping motors and DC brushless motors widely used in automotive, computers, electronics, communications, office, school equipment and common household products. Until recently, full magnetic rings were made of separate magnets joined together to create the desired ring shape. Now new technology enables the creation of super strong, one piece, multi-pole radial magnetic rings.
MPCO Magnetics offers high efficiency multipole magnetic rings. Multipolar sintered neodymium ring magnet is one of our most recent product developments, for which we developed specific raw material and production methods. This ring magnet is meant to replace the commonly used segment magnets, e.g. for application in the drive technology sector.
The advantages are significant:
The cylindrical shape allows smaller mechanical tolerance compared to segment magnets
Motor assembly is made much easier; installation of one or more rings versus gluing arcs into place.
Currently attainable qualities: 35H, 40H, 45H, 38M, 35SH, 38SH, 42SH, 35UH, 40UH
Radial sintering may prevent so-called “weak spots”
Homogeneous flux of the poles
Uniformity of the magnetic field is significantly better than that of segment magnets
Magnets are multi-poled – thus the ring does not compromise the magnetic properties
Ring magnets offer substantial cost savings on assembling the rotor
No additional rings or protecting cases are required for fixation
Different types of magnetization are possible: diametrical, multipolar as well asso called “skewed” magnetization
This ring provides high cost-effectiveness as well as better motor performance (as compared to the usual segment magnets)
The radial orientation results in a super strong magnet by virtue of superior metallurgy developed specifically to BE radially oriented.
Nickel or Epoxy Plated NdFeB Skewed Multipolar Ring Magnets Introduction:
Radial ring is whole radial oriented ring magnet, it can be magnetized as multi-pole, skewed and uni-pole magnetized. The ring mainly used as induction magnet for motors. It can improve the motors’ performance and property. It is the future development tendency of motor magnets. MPCO is one of the best sintered NdFeB ring magnet manufacturer in China.
Sintered NdFeB Neodymium Multi-poled Radial Ring GRADES:
Grade |
Remanence
Br(kGs) |
Coercivity
Hc(kOe) |
Intrinsic Coercivity
Hcj(kOe) |
Max Energy Product
(BH)max |
Operating Temp.
°C |
N35 |
11.7-12.2 |
≥10.9 |
≥12 |
33-36 (MGOe) |
80 |
N38 |
12.2-12.5 |
≥11.3 |
≥12 |
36-39 (MGOe) |
80 |
N48 |
13.8-14.2 |
≥11.6 |
≥12 |
46-49 (MGOe) |
80 |
N35M |
11.7-12.2 |
≥10.9 |
≥14 |
33-36 (MGOe) |
100 |
N38M |
12.2-12.5 |
≥11.3 |
≥14 |
36-39 (MGOe) |
100 |
N45M |
13.2-13.8 |
≥12.5 |
≥14 |
43-46 (MGOe) |
100 |
N35SH |
11.7-12.2 |
≥11.0 |
≥20 |
33-36 (MGOe) |
150 |
N38SH |
12.2-12.5 |
≥11.4 |
≥20 |
36-39 (MGOe) |
150 |
N42SH |
12.8-13.2 |
≥12.4 |
≥20 |
40-43 (MGOe) |
150 |
N45SH |
13.2-13.8 |
≥12.6 |
≥20 |
43-46 (MGOe) |
150 |
N33UH |
11.3-11.7 |
≥10.7 |
≥25 |
31-34 (MGOe) |
180 |
N35UH |
11.8-12.2 |
≥10.8 |
≥25 |
33-36 (MGOe) |
180 |
Related