Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Neodymium Separator Tube Magnet 19mmX19mmX300mm, Rectangle Square Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Boiler Rods Bars, Rectangular Shape Magnetic Filter Tubes, Candle Shaped Permanent Rod Magnets, Magnetic Rod separator filter bar magnets, Pulley Magnet China supplier
Neodymium Separator Tube Magnet 19mmX19mmX300mm , Item No. MPNTM-09 TECH SPECS:
|direction of magnetization
|Surface magnetic flux density
|Magnetic flux density on load point
|Maximum usage temperature
|Minimum usage temperature
|Intrinsic coercive force
|Maximum energy product
|Heat resistant temperature
|REACH RoHS Directive
Slurry: 9000-10000 gaussDry Powder: 7000-8000 gaussHow To Choose The Magnetic Intensity of Tube Magnets?
Bar systems filter small amounts of very fine iron and weakly magnetic particles from 30 µm up to approx. 2 mm out of fine powders, liquids and viscous products present in bulk flows and pipeline transport in various industries. The recommended magnetic intensity for different flow are as below:
Nanoparticles: 12000 gauss and above
Applications of Magnetic Bars? Square Magnetic Cartridge Tube 16mmX16mmX300mm
Tube Magnets are widely used for removal of ferromagnetic substances in various powders and slurries such as ceramic glaze slurry, mud, pigment, feldspar powder, kaolin, quartz sand, frit, silicon carbide, coal water slurry, emulsified oil, lube oil, plastic or any other applications that requires magnetic filtration.
Magnetic Bars are also the key component of a central heating filter, which is used for removing rust in the central heating system.
Relationship between Bar Diameter, Magnetic Strength and Max. Working Temp.?
“√” means it can reach that magnetic intensity by the corresponding diameter. NdFeB Tube Rectangle Magnets 19mmX19mmX100mm
“-” means not able to reach that magnetic intensity by the corresponding diameter.
The tube magnets which has smaller diameter than 38mm usually use SmCo material under “EH” temp. condition. But larger diameter will not choose SmCo.
The related Max. working Temp. from different series:
High Temperature, H series: 120℃
Super High Temperature, SH series: 150℃
Ultra High Temperature, UH series: 180℃ Long Neo Tube Magnet 19mmX19mmX200mm
Extreme High Temperature, EH series: 350℃
Contact Online Now!