New Rare Earth Teardrop Magnet Tube Bar

New Rare Earth Teardrop Magnet Tube Bar, Tear-Drop Special Design Magnetic Tube Separator Water Filter, Super Strong Easy-cleaning Rectangle Bar Magnets, Stainless Steel NdFeB Magnetic Stick Rods, Sintered Ferrite Ceramic magnetic rods, Teardrop permanent magnetic tube, SS304/316 Separator Magnetic Filter Bar Roller China supplier factory

New Rare Earth Teardrop Magnet Tube Bar  Features
1.It can also be used in liquid.
2. Magnetic Force on bar surface can reach 13000 Gauss
3. It can be manufactured with the desired lengths.
4. It is also possible to design rings, screw hole, handles, etc.
5. The tube surface can be processed with teflon and nitriding.

Specification
1. Magnetic Force between 3,000 to 13,000 Gauss according to customer needs.
2. Pipe Material: SUS304, SUS316 Tube Diameter: φ 25.4 mm
3. Tube shape can be made with round-type, square-type or tear-drop-type (Tear-drop-type pipe material: SUS304).

Tube Magnets are used extensively in the processing industry to capture magnetic susceptible foreign bodies, including screws, nuts, bolts, and small iron shards, in both dry and wet applications. Metal Contamination causes damage to delicate processing equipment, as well as affecting the end-quality and purity of the product. Tube Magnets are commonly used in the form of a Grate Magnet, where several Tubes form a Magnetic Separation grid.

Rare Earth Magnets are constructed out of Neodymium Iron Boron magnet slugs. These produce the highest permanent magnetic field and are used to separate very fine iron and weakly magnetic stainless steel from solids and liquids.

Even though the Rare Earth Tube Magnet is a sphere, fine non-magnetic material often builds up on the upper-most point of the Tube. Over time this ‘bridging’ can increase and ultimately cause a blockage. The build-up always reduces the separation performance, increasing the likelihood of metal contamination continuing through the process.   Tear-Drop Shaped Magnetic Bar Filters

The new MPCO Teardrop Magnet has the point of the tear orientated into the product flow. The surface area on the point of the tear is very small and prevents fine powder collecting on the surface. The powder then flows under gravity over the side of the Tube Magnet, with any magnetically susceptible materials attracted to the high magnetic force. These magnetics migrate to the bottom of the Tube Magnet, where they are securely held away from the product flow.

The new MPCO Teardrop Tube Magnet is available as a single Tube or as part of a multi-Tube Grate Magnet assembly.