Polished C8 Ceramic Humbucker Bar Magnet

Polished C8 Ceramic Humbucker Bar Magnet, Ceramic C8 Polished/Ground Bar Magnets, Ceramic8 guitar pickup magnets, Permanent Hard Ferrite Block Magnet for Electric Guitar Pickups, PAF Style Rectangular Bar Magnet for Humbucker/P90 Pickup supplier

Polished C8 Ceramic Humbucker Bar Magnet Feature:
Permanent Magnet Merial: Ceramic 8 / C8 / Ferrite
Size: 2.18” Long,2.3” Long,2.35” Long,2.6” Long, 2.625” Long,2.95” Long,3.125” Long,3.125” Long,3.33” Long
Polished:  Polished /Ground
For humbucker and P90 pickups, 7-8 string humbuckers
Can provide one end painted colour (customer choose blue/red/green/black ….) for easy identification
Magnetizing Options: Not Magnetized or Magnetized

Fully magnetized. For 8 string humbuckers. (3.125″ Long x 0.500″ Wide x 0.125″ Thick)
Ceramics are a bit too powerful for normal guitar parts, better for high-gain stuff. not great in the bridge position -too brittle.
Alnico2 are great in the right situation, so Blues-rock, Southern rock 70’s pop etc Think Billy Gibbons.
Alnico5  are great for riff-laden rock/metal and general playing.
This classic PAF style humbucking pickup fits most Epiphone/Gibson Les Paul,SG,ES style guitar, Ibanez or many similar guitar. Neck/bridge position
Genuine Wilkinson parts. 50mm/52mm pole spacing for neck and bridge, wax potted. On the pickup back, N for neck, B for bridge. Step Motor Bonded Inject Molding Neo Magnet Ring Magnetic Assembily
Classic vintage tone without noise, deliver an authentic sound
Magnet: Ceramic. D.C. Resistance: 7.6K neck, 14.1K bridge. Four conductor wires, black wire is ground, yellow wire is hot, red and white is for splitting coil

Polished C8 Ceramic Bar Magnets for Humbucker P90 Pickups

Attributes of Ceramic Magnets
* Economical
* High Hc and Hci compared to Alnico.
* More fragile than other types of magnets, thus manufactured in simple shapes only.
* Require expensive tooling.
* Increased temperature sensitivity.

Guitar Pickup Ceramic Humbucker Magnets

Ceramic magnets are chemically inert and non-conductive which offer advantages in applications requiring these attributes. We manufacture magnetic assemblies made with ceramic magnets, but because of the brittleness, we typically magnetize ceramic assemblies after the product is assembled.
Ceramic Magnets exhibit temperature limitations with a maximum operating temperature at 800°C. Elevated temperatures result in magnetic strength loss, but strength recovers when the material returns to room temperature. Temperatures above 450°C will require remagnetization. When using ceramic magnets in applications involving cold temperatures of -20°C or below please note that permanent loss of magnetic strength may result.