Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Polymer-Bonded NdFeB Magnet Block, Isotropic Compression Molded Rare Earth Neodymium Rectangular Magnet, BNP-6 thermoplastic bonded NdFeB block permanent magnets assemblies for Sensor and Motor, CUSTOM MOLDED BONDED NEO MAGNET, Automotive Polymer-Bonded Neodymium Magnets China Supplier
Polymer-Bonded NdFeB Magnet Block Technical
Material: Plastic Binders and NdFeB Powder
Part No.: MPBD-CDMB07
Plating / Coating: Gray Epoxy
Shape: Block / Rectangular
Tolerance: ±0.1 mm
Maximum Operation Temperature: 100 °C ~ 150 °C
Delivery Time: 7-15 days
Made in China
ABOUT BONDED NEODYMIUM / CUSTOM MOLDED MAGNETS
Bonded magnets, also called compression bonded magnets, are an excellent choice over other magnet types. They are suitable for the application which request high magnetic field strength, general mechanical strength, and simple compression shape. Bonded magnets are manufactured by molding compression of the compound alloy powder (Neodymium or SmCo) with resin. The resin is further processed to form magnets and resistant to normal industrial solvent and automotive fluids. Since no magnetic field is applied during the compression, the finished product can be magnetized in any direction. The normal application temperatures range from below -40°C to above 165°C. bonded block magnets
Injection magnets, also called injection molded magnets, are produced by an injection process of pre-mixed magnetic powder or mixed other composite material. Magnetic powders include Ferrite, Neodymium, and SmCo. Binder types include Nylon 6 and 12, PPS, and Polyamide, which produces an accurate and homogeneous magnetic part. Through this process magnets can be directly molded into various shapes (thin-wall ring, rods, slice, holes and pins, etc.) or over the components (shafts, cams, inserts and the like eliminating some steps) in assembly, with extremely tight tolerances and a broad range of magnetic properties and characteristics. Injection Molded magnets have good corrosion resistance in water and industrial solvents. The binders and magnetic alloys are capable of a wide range of application temperatures from below -40°C to above 180°C. Polymer-Bonded NdFeB Magnet Block
Bonded magnets can offer higher magnetic strength than injection magnets due to their higher magnetic particle density, but are limited to simpler geometries.
Contact Online Now!