Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Rare Earth Neodymium Eyelet Magnet Ø70 mm, Rare Earth Hanging Mounting Holding Clamping System, Super Strong Neodymium Eyelet Magnets, Powerful NdFeB Pot Permanent Magnet for Fishing, M10 Thread Eyebolt Pot Magnet, Treasure Salvage Magnets, Search Magnets, Recovery Magnets China Supplier
Rare Earth Neodymium Eyelet Magnet Ø70 mm Technical
Material: Neodymium (NdFeB ) and Steel
Part No.: MPPT-NF70
Plating / Coating: Nickel (Ni-Cu-Ni) or Zinc (Zn)
Shape: Eyelet / Eyebolt
Pot Magnet Size:
Pot Total Diameter (D): 70 mm
Pot Magnet Diameter (D1): 17 mm
Pot Height (h): 16.9 mm
Total Height without Eyelet (H): 34.2 mm
Total Height with Eyelet (H1): 83.2 mm
Thread M: M10
Tolerance: ±0.1 mm
Weight: 531 g
Holding Force: 153 kg
Maximum Operation Temperature: 80 °C
Delivery Time: 7-15 days
Made in China
Material: Housing steel and Magnetic core sintered neodymium internal female threaded magnet with eyebolt.
Version: Housing, galvanized. Magnet, Ni coated or Zn coated
Note: Shallow pot magnets with internal threaded and eyelet. These magnets are pressed or glued into the receiving holes.
Hairline cracks in the magnetic material are unavoidable for technical reasons in the D=75 version. They do not impair the attracting function of the magnets in any way.
Temperature range: max. 80°C.
Super Strong Neodymium Pot Magnet Cap NdFeB Magnet – Magnetic Pot
Pot Magnets offer an increase in clamping force onto ferromagnetic materials because the magnets are inside a ferromagnetic casing (Ni or Zinc plated mild steel) which gives an improved magnetic circuit. This allows high clamping forces to be achieved with minimal size.
The Pot Magnet with External Threaded Stud / Boss Mounting can be screwed into M4, M5, M6 and M8 holes. Or the Pot Magnet with External Threaded Stud / Boss Mounting can be put into a standard hole and a nut can be used to clamp it in place.
Strong Eyelet Neodymium Magnet Features:
– Magnet is encapsulated on all but one side with a protective steel holding pot.
– Incorporates a countersunk hole for use with flathead screws.
– Powerful Rare Earth (Neodymium) permanent magnet.
– High gloss Nickel coating, for protection against corrosion.
– Maximum operating temperature 80°C / 100°C
It is possible to produce bespoke Pot Magnets with External Threaded Stud / Boss Mounting but a minimum order quantity may be required (the minimum quantity depends on the size, shape and performance required). We can send our extended range brochure upon request. strong eyelet neodymium magnet
Contact Online Now!