Rod Hard Ferrite Magnet Inductors

/Rod Hard Ferrite Magnet Inductors
  • Rod Hard Ferrite Magnet Inductors
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Rod Hard Ferrite Magnet Inductors, Ceramic Bar Magnets, Hard Ferrite Rod Cylinder Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets Electronic Component, Anisotropic or Isotropic Ferrite Industrial Magnet, Rod Hard Ferrite Permanent Magnet Coil Cores China Factory

    Rod Hard Ferrite Magnet Inductors Speciation:
    1, Material: Ferrite magnet is made of Sro or Bao and Fe2o3 by Ceramic processing technology
    2, Shape: Rod, Bar, Cylinder, Cylindrical
    3, Grades: Y10T,Y20,Y25,Y30,Y30BH,Y35 (China standard); C1,C5,C8,C11 (U.S.A. Standard)
    4, Dimension: Customized
    5, Tolerances: ‘+/-0.1mm
    6, Coating: No need Coating.
    7, Application: Widely used in ammeter, speaker, audio, phone, TV, dynamo, DC permanent magnet motors (used in cars), etc.

    These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets
    Magnetised axially through the thickness so that one 100x25mm face is north and the other is south
    +/-0.1mm manufacturers cutting tolerance
    Anisotropic Strontium ferrite ceramic 8 material. These craft magnets are stronger than your average craft magnet. These magnets are suitable for the following applications:
    moulding clay
    and other craft and educational projects.

    Ceramic Bar Magnets Strong Rod Ferrite Magnets greatly concentrate magnetic fields and radio waves, especially useful at lower frequency. They are easy to use as a directional antenna: just wind turns of wire on the rod and then connect a variable capacitor to tune it up to the desired receive frequency.
    Ferrite rods are made up of special ceramic magnetic materials wherein the magnetic molecules (domains) have the ability to align freely with external magnetic fields. The result is a powerful gain in magnetic strength (amplification) of the radio signal but without adding any electronic “hiss” noise. Its almost like a pre-amplifier but requires no external power except for the incoming signals.
    Antennas: Transmits and Receive,
    Electromagnet cores,
    Transformer cores,
    Audio chokes,
    RF chokes,
    Metal detectors,
    Electromagnetic sensors,
    Custom inductors,
    Speaker crossover coils,
    Experimental motors and more.

    Rod Hard Ferrite Magnet Inductors MPCO Stock Size:

    Model. No. Dimensions  D*H (mm) Model. No. Dimensions  D*H (mm)
    MPFCM-001 D5 × (7-30) MPFCM-002 D8 × (10-32)
    MPFCM-003 D10 × (15-40) MPFCM-004 D15 × (15-50)
    MPFCM-005 D18 × (25-50) MPFCM-006 D20 × (20-60)
    MPFCM-007 D25 × (30-70) MPFCM-008 D30 × (30-70)
    MPFCM-009 D35 × (40-80) MPFCM-010 D40 × (40-80)
    MPFCM-011 D45 × (50-100) MPFCM-012 D50 × (50-100)

    The above size is suitable for customer’s Magnetic Grade, Dimension tolerance: D ± 2%, h ±0.15mm

    error: Content is protected !!