Dia 43mm TPE NdFeB Cable Holding Magnet System, Rubber Magnetic Cable Tie Holder, Rubber Encased Pot Magnet Assembly NdFeB, Santoprene Rubber Covered Magnetic System, Outdoor Rubber Coated Magnetic Cable Clips Magnet Holder, Neodymium Clamping Magnet Fixing Holding System Boutique Magnets, Rubber Embedded Waterproof Magnetic Base Mount Holder Supplier Dia 43mm TPE NdFeB Cable Holding Magnet […]
Segment Neodymium Magnet Nickel N52, Powerful Segment NdFeB Permanent Magnet, Motor Rotor Generator and Actuator Magnet, super strong neodymium iron boron arc tile magnets, Sintered Neo Magnetic Arc, extremely strong rare earth arc neodymium magnet China Supplier
Segment Neodymium Magnet Nickel N52 Technical Specifications:
Material: Neodymium (NdFeB)
Plating: Nickel (Ni-Cu-Ni)
Shape: Segment, Arc, Tile
Magnetisation Direction: Axial / Radial
Residual Magnetic Flux Density (Br): 1430-1480 mT (14.3-14.8 kGs)
Energy Density (BH)max: 398-422 KJ/m³ (50-53 MGOe)
Coercivity Force (Hcb): ≥ 796 kA/m ( ≥ 10.0 kOe)
Intrinsic Coercivity Force (Hcj): ≥ 876 kA/m ( ≥ 11 kOe)
Maximum Operation Temperature: 60 °C
Delivery Time: 14-35 days
Permanent segment magnet Neodymium Iron Boron magnet arc magnet ndfeb segment permanent magnet small arc magnet segment ndfeb magnet
MPCO produced from Nd-Fe-B provide the “biggest bang for the buck”. This is the strongest grade of magnetic material and well is well suited for MPCO design and construction. It is prone to corrosion, however, when submersed in liquids. As such, for MPCO exposed to the cooling media, either a hermetic seal will be required or Sm-Co materials should be utilized. Additionally, these magnets have a typical upper thermal limit of about 100°C in assembly (specialty higher thermal limit grades are available up to 200°C).
Neodymium (NdFeB) arc magnets, Neodymium (NdFeB) segment magnets and similarly shaped NdFeB (Neodymium) magnets with a maximum operating temperatures of up to 230 °C can be supplied by special request. Please contact us.
Our neodymium (NdFeB) block magnets are nickel plated unless stated otherwise – other coatings are possible.
Other sizes, shapes, grades and coatings of Neodymium arc segement magnet (NdFeB arc segment magnet) are available.
AND IF YOU WOULD LIKE US TO ASSEMBLE YOUR NEODYMIUM ARC MAGNETS ONTO YOUR ROTOR (OR ANY OTHER ASSEMBLY), PLEASE CONTACT US – WE CAN SUPPLY MAGNETIC ASSEMBLIES AS WELL AS THE MAGNETS.
MPCO MagTech aims at our customers’ satisfaction, a respect to people, society and environment, we clearly know “Quality is the prerequisite for long-term success”. Quality is life, which is declarad in the corporate strategy and quality policy of MPCO MagTech.
We cooperate with SGS and CAS Institute of Physics in magnet production and Certified by the management systems :
We ensure that all our staff are trained to understand, implement and maintain our quality policy,and our products are produced under these management systems . We also pay close attention to the environment quality improvement.
MPCO MagTech People are committed to your needs and take it as a precondition for success of your company.
Contact Online Now!