Segment Rare Earth Magnet for AC Dry Hydraulic Motor, Highly Efficient Motors Magnet, Rare-Earth Arc Magnets for Motor Generator, High-performance Strong NdFeB Magnets
Segment Rare Earth Magnet for AC Dry Hydraulic Motor Parameter
Part No. NSGN45-68
Dimensions Customized sizes
Material Sintered Neodymium-Iron-Boron (NdFeB)
Shape Arc / Segment
Plating Zinc (Zn)
Magnetization Direction Diameter
Grade N45
Maximum Temperature: 80 Degree
Coating: Nickel (Ni)
Magnetization: Inside Curve to Outside Curve
Dimensional Tolerance +/-0.005″
Neodymium magnets are the most powerful of all permanent magnets. They are often known as “Super Magnets”.
They are used in applications where the strongest magnetic force is required from the smallest possible volume of magnet material.
Neodymium magnets are relatively new, they were developed in the mid 1980s and can now be found extensively in countless modern applications from fridge magnets to wind turbines!
Threads cannot be manufactured directly into neodymium magnets because they are too hard and brittle, but when integrated into pot magnet assemblies, rear threaded fixings are available in the steel pot magnet shell.
Since the introduction of neodymium magnets, the manufacturing cost of neodymium magnets has fallen in line with a massive increase in production capability and now small neodymium magnets are cheap enough to be used in low cost promotional giveaway items.
Neodymium magnets (NdFeB), commonly known as ‘rare earth’ magnets are high-performance permanent magnets constructed from an alloy of neodymium, iron and boron. They are true permanent magnets and will not lose their magnetism unless they are heated to a temperature which exceeds the maximum operating temperature rating or their protective plating is damaged and water ingress causes rusting, which over time will magnetically and mechanically damage the magnets.
MPCO has a wide range of shapes and sizes of neodymium magnets and has over 20 million neodymium magnets in it’s CHINA stock, all available on a next working day delivery basis. Thin Titanium Nitride TiN Bio-Plating Neodymium Disc Magnet for FDA Medical
If you need neodymium magnets that are not in the standard range, then don’t worry, they can be made specially to order usually on a 4 week lead time and free of charge quotations can be issued quickly.
MPCO prides itself on offering free, expert, technical advice for it’s customers, ensuring they are on the cutting edge of supplying neodymium magnets for the latest emerging technologies.
Designed for use with belted hydraulic pump systems, these Imperial motors are exceptionally quiet, highly efficient and built for rugged duty. Totally Enclosed Fan Cooled (TEFC) designs are available for most ratings.
Features:
Rated for 80 or 120 starts per hour
15 Hp through 100 Hp
1800 RPM, Dual ball bearing
Voltages: 200, 230/460, 575 AC 3-phase, WYE-DELTA start
Drip-proof or TEFC enclosure
CSA – CUS
Related