Segment SmCo Laminated Magnet

/Segment SmCo Laminated Magnet
  • Segment SmCo Laminated Magnet
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Segment SmCo Laminated Magnet, Laminated Samarium Cobalt Magnets for Eddy Current Losses, layered magnet, split magnet and segmented magnet, Lamination Rare Earth SmCo Magnet for Motors, Segment Laminated Permanent Magnets Offer the Thinnest Insulating Layers & Lowest Eddy Current Losses for Optimal Efficiency

    Segment SmCo Laminated Magnet for Eddy Current Losses Item No. MPCO-LAMS  series
    Customzied Specific Requirements
    Know as Lamination Magnetic Core
    OEM or ODM service: Accept
    Dimension: Customized size
    Custom Grade: SmCo5,  Sm2Co17
    Magnetization direction: Thickness, Length, Axially, Diametre, Radially, Multipolar
    Surface Treatment: UNCOATED, Silver, Gold, Zinc, Ni-cu-Ni. Epoxy etc.
    Tolerance: +/-0.02 – 0.05mm
    Application: SmCo rare earth permanent magnets are widely applied in Auto, energy-efficient Motors and Generators, Machinery, Audio/Video and Communication Equipment, Medical Device(MRI), Office Automation, Magnetic Separator, etc.

    The magnet made by segmentation technology can be called laminated magnet, layered magnet, split magnet and segmented magnet. For magnet segmentation technology, the whole magnet will be segmented into several pieces, then processed into specific shape and dimension after glued together by special isolation glue.

    What is the Advantages of Laminated Magnet?
    According to many simulation cases and actual products, the magnet segmentation technique has excellent performance to prevent the eddy current. With the increase of segment, the eddy current losses of permanent magnet significantly decreased. Magnet segmentation technique has been already applied in the NdFeB and SmCo magnet.

    The fewer the eddy current loss becomes, the lower the heat generates to enhance higher efficiency. Nowadays the demand of laminated rare earth magnets has been going up, because aerospace, industrial markets and promising EV especially are dedicating to pursuing the balance between motor power and heat.Laminated Samarium Cobalt Magnets for Eddy Current Losses

    Custom Drawing Design Block Insulated Magnet Thanks to knowledge in electric motor and extensive experience in laminated magnets, Horizon can work with customers to improve motor performance through ensuring laminated magnets with following characteristics:

    Stable working at temperature up to 200˚C
    Consistency of insulation guaranteed
    Insulation layer ranging 25 -100 μm
    Magnet layer with thickness from 0.5mm and up in a wide of shapes like block, loaf, segment and wedge
    Magnet material in SmCo or Neodymium

    Samarium Cobalt magnets (SmCo) may be weaker than NdFeB magnets at room temperature but SmCo will often outperform NdFeB above +150 to +180 deg C (subject to the application and grade). SmCo magnets are ideal for aerospace, automotive, sensor, loudspeaker, motor and military applications. In mission critical applications they are an ideal first choice. SmCo magnets offer minimal change in magnetic output over a small temperature change (with far less variation than NdFeB or ferrite; only Alnico is better). The Low Temperature Coefficient (LTC) versions have less variation in magnetic output with temperature change (due to added Gd and Er). SmCo magnets performance over a massive range of temperatures (from near to -273 deg C up to +350 deg C). The H versions Sm2Co17 have higher Hci and operate up to +350°C rather than +300°C.SmCo and NdFeB could be interchangeable e.g. SmCo30 should perform very similarly to N30 at ambient temperature.

    error: Content is protected !!