Segmentation Technology Layered Magnet

Segmentation Technology Layered Magnet, Segmented Lamination Magnet, NEODYMIUM layered magnet, split magnet, Motors Eddy Current Reduction Segmentation Magnet, High-resistivity sintered rare earth arc laminated magnets, Permanent type Laminated Magnets for high efficiency motors to eddy current reduction

Segmentation Technology Layered Magnet Item No. MPCO-LAMN OR MPCO-LAMS series

The magnet made by segmentation technology can be called laminated magnet, layered magnet, split magnet and segmented magnet. For magnet segmentation technology, the whole magnet will be segmented into several pieces, then processed into specific shape and dimension after glued together by special isolation glue.

Lamination magnet: reduce the eddy current loss of the motors(decrease the heat and enhance the motor efficiency).We can help you relize the magnet customizationof the following contents:
(1)Insulation thuckness: 5um-100mm
(2)Insulation layers: 2-40 layer
(3)Max working temp. of the magnet: 60-400 degree
(4)Temp. Resistance of the magnet surface coating: 200-500 degree
(5)Corrosion resistance of the magnet surface coating: Neutral salt spray resistance can be over 1000 hours and PCT can be over 500 hours.

How to reduce eddy current losses of rare earth magnet?

The eddy current loss of rare earth magnet can be reduced by many ways, among them, the material science researchers have proposed to prepare the high-resistivity magnet, such as:
a. Bonded magnet.
b. High-resistivity sintered magnet.

What is Eddy Current Losses of laminated magnet

The consumption of motor is the greatest among the rotating machinery. The eddy current losses are one of the worst enemies to high-speed rare earth permanent magnet motor. The eddy current will give rise to the temperature of the rare earth permanent magnet, then the magnet will be demagnetized, therefore influence the work efficiency of the motor. As the metallic material, the rare earth permanent magnet has lower electrical resistance, and it also become the direct source of eddy current losses.

What is Skin Effect

The internal of metal with good conductivity will generate the induced electromotive force under the external changing magnetic field, and formed the eddy current inside the metal. The Joule heating effect of the induced eddy current lead to the above-mentioned eddy current losses. Actually, the eddy current concentrates mainly on the surface layer of the conductor. This phenomenon is known as the skin effect, and the basic reason is that the changing electromagnetic field generates an opposite vortex electric field inside the metallic conductor. The skin depth δ can be described as below relation:
ISO/IATF Certificated High Temperature SmCo Laminated MagnetWhere μ is the permeability of conductor; ρ is the electrical resistance; ω is the angular frequency of alternating magnetic field, ω=2πf.The higher rotation speed, high permeability and low electrical resistance will cause lower skin depth and high losses.
We can also provide magnetic assembly,even the complete motor robot. Segmented Lamination Magnet