Separator Filter Magnetic Bar Φ76mmX300mm

/Separator Filter Magnetic Bar Φ76mmX300mm
  • Separator Filter Magnetic Bar Φ76mmX300mm
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Separator Filter Magnetic Bar Φ76mmX300mm, 13000 Gauss Neodymium Rectangle Round Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Separation Rods, Round Bar Shape Magnetic Filter Tubes, Permanent Separator Rod Magnets, Easy Clean Magnetic Probe filter bar magnets, Grid Magnet China supplier

    Separator Filter Magnetic Bar Φ76mmX300mm , Item No.  MPNBM-45 TECH SPECS:

    Name Symbol SI CGS
    Shape Diameter D 76 mm 7.6 cm
    diameter d 8 mm 0.8 cm
    Length L 300 mm 30 cm
    Screw M 20 mm 2 cm
    direction of magnetization M A
    Weight Net 10.207 kg 10207 g
    Surface treatment Polish  μm
    Magnetic
    Characteristics
    Surface magnetic flux density B 1300 mT 13000 Gauss
    Suction force
    Adhesion
    F  kgf  gf
    Magnetic flux density on load point Bd  mT  Gauss
    Total flux φo  Wb  Mx
    Permeance Coefficient Pc  Pc
    Maximum usage temperature Tw 100 ℃
    Minimum usage temperature Tw  ℃
    Material properties Materialsymbols Magnetic Bar 316
    remanence Br – mT – kG
    Coercivity Hcb – kA/m  kOe
    Intrinsic coercive force Hcj – kA/m  kOe
    Maximum energy product BH – kj/m3  MGOe
    Temperature coefficient Br – %/℃
    Hcj – %/℃
    Heat resistant temperature Tw – ℃
    Curie temperature Tc – ℃
    Density ρ – kg/m3
    Remarks REACH RoHS Directive

    How To Choose The Magnetic Intensity of Tube Magnets?
    Bar systems filter small amounts of very fine iron and weakly magnetic particles from 30 µm up to approx. 2 mm out of fine powders, liquids and viscous products present in bulk flows and pipeline transport in various industries. The recommended magnetic intensity for different flow are as below:

    Dry Powder: 7000-8000 gauss
    Slurry: 9000-10000 gauss  Separation Neodymium Magnet Tube Φ76mmX100mm
    Nanoparticles: 12000 gauss and above

    Applications of Magnetic Bars?
    Tube Magnets are widely used for removal of ferromagnetic substances in various powders and slurries such as ceramic glaze slurry, mud, pigment, feldspar powder, kaolin, quartz sand, frit, silicon carbide, coal water slurry, emulsified oil, lube oil, plastic or any other applications that requires magnetic filtration.

    Magnetic Bars are also the key component of a central heating filter, which is used for removing rust in the central heating system.

    Relationship between Bar Diameter, Magnetic Strength and Max. Working Temp.?
    “√” means it can reach that magnetic intensity by the corresponding diameter.
    “-” means not able to reach that magnetic intensity by the corresponding diameter.  High-Intensity Neodymium Magnet Tube Φ50mmX300mm
    The tube magnets which has smaller diameter than 38mm usually use SmCo material under “EH” temp. condition. But larger diameter will not choose SmCo.
    The related Max. working Temp. from different series:
    High Temperature, H series: 120℃
    Super High Temperature, SH series: 150℃
    Ultra High Temperature, UH series: 180℃
    Extreme High Temperature, EH series: 350℃  Separator Neodymium Filter Magnetic Tube Φ76mmX200mm

    error: Content is protected !!
    Phone