Sm2Co17 Tile Arc Samarium Generator Permanent Magnet

Sm2Co17 Tile Arc Samarium Generator Permanent Magnet YXG-26, Sm2Co17 Sm1Co5 Samarium Cobalt Segment Magnet For Motor, RE Cobalt, RECo and CoSm, High Temperature Sintered SmCo Arc Magnet, Powerful Rare Earth Permanent Magnets, Generator rotor magnet, segment magnets China supplier

Sm2Co17 Tile Arc Samarium Generator Permanent Magnet YXG-26 Item No. MPCO-SMOS  series
Customzied Specific Requirements
OEM or ODM service: Accept
Dimension: Customized size
Custom Grade: SmCo5,  Sm2Co17
Magnetization direction: Thickness, Length, Axially, Diametre, Radially, Multipolar
Surface Treatment: UNCOATED, Silver, Gold, Zinc, Ni-cu-Ni. Epoxy etc.
Tolerance: +/-0.02 – 0.05mm
Application: SmCo rare earth permanent magnets are widely applied in Auto, energy-efficient Motors and Generators, Machinery, Audio/Video and Communication Equipment, Medical Device(MRI), Office Automation, Magnetic Separator, etc.

SmCo magnets will outperform NdFeB magnets at temperatures above +150 to +180 degrees C.
SmCo magnets can be used at cryogenic temperatures (i.e. towards absolute zero, -273 degrees C).
The magnet shape, its environment, and the actual application affect how the NdFeB magnet will perform. Temperature is important as well as damp or wet conditions.

When determining suitability, you should analyse the Intrinsic curve not the Normal curve.
By keeping the intrinsic working point above the ‘knee’ and ideally at the BHmax working point maximum performance is possible. Sintered SmCo Rare Earth Segment Motor Magnets YX-18
If you have any more questions, require technical assistance and would like a quotation, simply contact us.
Although we have made every attempt to provide accurate information, we do reserve the right to change any of
the information in this document without notice.
We cannot accept any responsibility or liability for any errors or problems caused by using any of the information
provided.

Generator Motor Permanent Tile Samarium Magnet

Extremely strong rare earth magnets, Samarium Cobalt magnets (SmCo) are composed of samarium, cobalt and iron. Not sure if samarium cobalt is the best material for your application? Review our permanent magnetic materials comparison for more information.

Manufacturing – In general, the elements are melted together and milled into a powder that is dry-pressed to shape in the presence of a magnetic field. The material is then sintered, aged, ground to dimension, magnetized and tested. They are called “rare earth” magnets because the elements of samarium cobalt are classified as such in the lanthanides section of the Periodic Table of the Elements. Customized Tile Arc Sintered Smco Rare Earth Magnet

Tile Arc Samarium Permanent Magnets YXG-26

Tolerances – For as-pressed material, tolerance on the thickness (direction of magnetization) is +/- .005”. Other dimensions are +/- 2.5% or +/- .010”, whichever is greater.

According to International Magnetics Association (IMA) standards, visual imperfections such as hair-line cracks, porosity and minor chips are commonly found in sintered metallic magnets. A chipped edge is considered acceptable if no more than 10% of the surface is missing. Cracks are acceptable as long as they do not extend across more than 50% of pole surface.

SmCo Magnet Properties and typical physical properties