Standard Bar Tube Magnet Φ25mmX100mm

/Standard Bar Tube Magnet Φ25mmX100mm
  • Standard Bar Tube Magnet Φ25mmX100mm
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Standard Bar Tube Magnet Φ25mm X 100mm, 12000 Gauss Neodymium Rectangle Round Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Separation Rods, Round Bar Shape Magnetic Filter Tubes, Permanent Separator Rod Magnets, Easy Clean Magnetic Probe filter bar magnets, Grid Magnet China supplier

    Standard Bar Tube Magnet Φ25mm X 100mm , Item No.  MPNBM-16  TECH SPECS:

    Voice Name Symbol SI CGS
    Shape Diameter D 25 mm 2.5 cm
    diameter d 6 mm 0.6 cm
    Length L 100 mm 10 cm
    Screw M 6 mm 0.6 cm
    direction of magnetization M A
    Weight Net 0.368 kg 368 g
    Surface treatment Polish  μm
    Surface magnetic flux density B 1400 mT 14000 Gauss
    Suction force
    F  kgf  gf
    Magnetic flux density on load point Bd  mT  Gauss
    Total flux φo  Wb  Mx
    Permeance Coefficient Pc  Pc
    Maximum usage temperature Tw 100 ℃
    Minimum usage temperature Tw  ℃
    Material properties Materialsymbols Magnetic Bar 316
    remanence Br – mT – kG
    Coercivity Hcb – kA/m  kOe
    Intrinsic coercive force Hcj – kA/m  kOe
    Maximum energy product BH – kj/m3  MGOe
    Temperature coefficient Br – %/℃
    Hcj – %/℃
    Heat resistant temperature Tw – ℃
    Curie temperature Tc – ℃
    Density ρ – kg/m3
    Remarks REACH RoHS Directive

    The majority of Separator Magnet Tubes contain NdFeB Rare Earth magnets but versions containing Ferrite magnets, SmCo Rare Earth magnets and Alnico magnets also exist. The NdFeB versions come as standard strength and high intensity strength as the two main options. Our Food Grade Range are all encased in a food quality stainless steel (usually SS304 but SS316 is also offered). By having a food quality stainless steel casing, the Separator magnet Rods are corrosion resistant and easy to clean. Neodymium Separator Magnet Tubes Φ23mmX100mm

    The “standard” Separator Rod is SS304 encased, contains NdFeB magnets, offers 10kGauss (1 Tesla) at multiple locations along its length, is 25mm in diameter available in lengths varying from 50mm up to 500mm in 50mm increments, has M8 tapped holes at the ends and is rated to work in temperatures up to +80 deg C. We can offer variations from this standard design as well.  Neo Separator Magnet Rods Φ23mmX200mm

    The Standard NdFeB Separator Magnet Rods are rated for a maximum recommended operating temperature of around +80 degrees C. The Separator Rods can be produced for higher rated maximum operating temperatures upon request. The maximum operating temperatures available are +80, +100, +120, +150, +180 and +200 degrees C. When working above +180 degrees C, the SmCo separator magnet version may be a better choice as it more powerful than NdFeB above +180 degrees C and can also be used up to +350 degrees C (for note, SmCo versions are 9000Gauss typically at room temperature). Less commonly used Ferrite versions are also available but are much weaker (Ferrite versions are 1500Gauss typically at room temperature but work up to +150 degrees C).  NIB Separator Magnet Bars Φ23mmX300mm

    error: Content is protected !!