Threaded Stud Magnetic Pad MagPads for Fixing Rooftop Signs to Vehicles, Magnetic Holding Pad for Taxi, Adverting and Driving School Signs, Steel and Rubber Encased Pot Magnet Assembly Ferrite, Rooftop sign magnet to vehicle, Ferrite Magnetic Pad, MagPad, Rubber Coated Magnetic Mounting Pad, Taxi Magnet, Car Roof Top Magnets, Clamping Magnet Fixing Holding System Boutique Magnets, Waterproof Magnetic Base Mount Holder China Supplier
Threaded Stud Magnetic Pad MagPads for Fixing Rooftop Signs to Vehicles Parameter:
Item No. MagPad-1
Shape: Rectangle
Magnetic Face: 79 x 53
Thickness: 12mm
Grade: Y30BH
Material: Ferrite
Vertical Pull (Kg): 10
Slide Resistance (Kg): 5
Max Temp (degrees C): 50
Fixing: Magnetic Face
Magnet material: Rubber covered ferrite magnets and Galvanized steel
Magnet coating: Nickel (ni-cu-ni) or Zinc (zn)
Max. work temperature: +120℃
Colour: Silver and Black
79mm x 53mm x 12mm thick with 16mm length bolt
Magnetised with a six-pole striped magnetic field on the 79mm x 53mm magnetic pad
Each magnet can support a steel weight of up to 10kg vertically from the magnetic face when in flush contact with a mild steel surface
Rubber coated to increase friction and reduce corrosion
This unique combination removes the risk of scratching paintwork – the polyurethane coating on the base of the magnet is relatively soft and therefore less likely to cause abrasion.
The polyurethane coating of the car roof top magnet also reduces the peel strength of the magnet, making it easier to remove from the metal surface when used for either interior or exterior applications.
The magnet system has zinc coated backing plates for corrosion resistance and there are a wide variety of designs with different screw holes or stud mountings.
The Car Roof Top Magnet is used in a wide range of applications including car roof signs, antenna clamp systems, vehicle tracking units, temporary signage, attaching to boards and pictures for clamping to metal partitions, etc. It is often called a ‘Taxi Magnet’ as it is used within the taxi signs attached to the car roof to hold them securely in place.
Please be aware that magnets will not attract to panels made of non-magnetic materials such as aluminium or carbon fibre. MagPads
Another use is with use with doors. The unit can clamp onto mild steel strips on doors and provides a good clamping force with very little slip and low noise when clamping.
The Car Roof Magnet is also ideal for lighting fixing assemblies. It clamps securely to mild steel walls and girders with no damage to paintwork and no slippage on vertical surfaces, making it a superb choice for temporary and permanent lighting fixings.
Care Instructions
Regularly inspect the rubber coating for wear or damage.
Clean with a mild soap solution and a soft cloth to remove dirt.
Avoid using abrasive materials that could scratch the surface.
Store in a cool, dry place to maintain magnet strength when not in use. MagPads
Care Instructions:
Inspect rubber coating regularly for wear
Clean with mild soap and soft cloth
Avoid abrasive cleaners or tools
Protective Add-ons: Optional clear protective roof film and rubber edge seal available for extra protection. Rubber-coated Magpad with Steel Plate and a 6mm Diameter Bolt For Vehicles Taxi
Related