Tube Rod Neodymium Magnet Φ25mmX500mm

/Tube Rod Neodymium Magnet Φ25mmX500mm
  • Tube Rod Neodymium Magnet Φ25mmX500mm
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • Tube Rod Neodymium Magnet Φ25mmX500mm, 14000 Gauss Neodymium Rectangle Round Magnetic Cartridge Bar Rod, Magnetic Filter Bar, Magnet Water Filter, Magnetic Separation Rods, Round Bar Shape Magnetic Filter Tubes, Permanent Separator Rod Magnets, Easy Clean Magnetic Probe filter bar magnets, Grid Magnet China supplier

    Tube Rod Neodymium Magnet Φ25mmX500mm , Item No.  MPNBM-24  TECH SPECS:

    VoiceNameSymbolSICGS
    ShapeDiameterD25 mm2.5 cm
    diameterd10 mm1 cm
    LengthL500 mm50 cm
    ScrewM6 mm0.6 cm
    direction of magnetizationMA
    WeightNet1.84 kg1840 g
    Surface treatmentPolish μm
    Magnetic
    Characteristics
    Surface magnetic flux densityB1400 mT14000 Gauss
    Suction force
    Adhesion
    F kgf gf
    Magnetic flux density on load pointBd mT Gauss
    Total fluxφo Wb Mx
    Permeance CoefficientPc Pc
    Maximum usage temperatureTw100 ℃
    Minimum usage temperatureTw ℃
    Material propertiesMaterialsymbolsMagnetic Bar316
    remanenceBr– mT– kG
    CoercivityHcb– kA/m kOe
    Intrinsic coercive forceHcj– kA/m kOe
    Maximum energy productBH– kj/m3 MGOe
    Temperature coefficientBr– %/℃
    Hcj– %/℃
    Heat resistant temperatureTw– ℃
    Curie temperatureTc– ℃
    Densityρ– kg/m3
    RemarksREACH RoHS Directive

    Our magnetic rods are widely used in the food and dairy industry to protect their product from ferrous metal contaminant. From large magnetic separator systems to small single drawers these rods extract any ferrous contaminant that may be present.

    The Standard NdFeB Separator Magnet Rods are rated for a maximum recommended operating temperature of around +80 degrees C. The Separator Rods can be produced for higher rated maximum operating temperatures upon request. The maximum operating temperatures available are +80, +100, +120, +150, +180 and +200 degrees C. When working above +180 degrees C, the SmCo separator magnet version may be a better choice as it more powerful than NdFeB above +180 degrees C and can also be used up to +350 degrees C (for note, SmCo versions are 9000Gauss typically at room temperature). Less commonly used Ferrite versions are also available but are much weaker (Ferrite versions are 1500Gauss typically at room temperature but work up to +150 degrees C).  Filter Separation Magnet Rod Φ25mmX400mm

    The field strength from any magnet will drop with rising temperature – this is normal (the decrease in performance is linked to the characteristics of the permanent magnet used). The field output will return again as it cools (if the maximum operating temperature is not exceeded). Exceeding the maximum operating temperature causes a permanent irreversible drop in performance.  Rare Earth Magnetic Rod Tube Φ25mmX450mm

    The MPCO Magnetics separator rods are ideal for capturing ferrous contamination. They are capable, particularly with the more powerful units, of capturing ferromagnetic and ferrimagnetic materials as well as materials with permeability noticeably greater than 1, such as some of the paramagnetic and antiferromagnetic materials. For maximum capture the debris really need to get into direct contact with the Magnetic Rods / Magnetic Separator Rods.

    error: Content is protected !!