Uncoated Magnetic AlNiCo Rectangular Bar 150mm X 12mm X 6mm

Uncoated Magnetic AlNiCo Rectangular Bar 150mm X 12mm X 6mm, Buy AlNiCo Block Shape Permanent Magnet, Uncoated AlNiCo Block Bar Magnet, sintered or casting Alnico Square / Rectangular Bar Magnets, Magnetic Alnico Blocks & Bars China supplier factory

Uncoated Magnetic AlNiCo Rectangular Bar 150mm X 12mm X 6mm Parameter:

Product No.: MPBAM-1501206
Length: 150mm
Width: 12mm
Thickness: 6mm
Magnet Type: Alnico
Magnet Grade: Alnico 5
Maximum Temperature: 540°C
Coating: Uncoated
Direction of Magnetism: Through Length

Alnico Block Magnets, also called Bar magnets, have a high residual induction, an exceptional temperature stability over an extensive range of temperatures and a great resistance to corrosion. They are both hard and brittle.

AlNiCo Magnets alloys have some of the highest Curie temperatures of any magnetic material, around 800 °C (1,470 °F), although the maximal working temperature is normally limited to around 538 °C (1,000 °F). They are the only magnets that have useful magnetism even when heated red-hot. This property, as well as its brittleness and high melting point, is the result of the strong tendency toward order due to intermetallic bonding between aluminium and other constituents. They are also one of the most stable magnets if they are handled properly. Alnico magnets are electrically conductive, unlike ceramic magnets.

Proprietary technology and advantages
High performance product technology maturity,performance stability;
Full automatic equipment for the detection of magnetic flux for all products;
Can be stable production of thin-walled deep holes,special shaped,precision micro products,processing technology are stable

Alnico is an alloy that contains varying amounts of Aluminium, Nickel and Cobalt as well as other metals. Typically, Alnico formulas have very high temperature capabilities, up to 540˚C. They are not as powerful as other types of magnet and lose their magnetism with time.
Alnico has a classic metallic appearance, and can be made with quite complicated pole structures depending on the purpose of the magnet. Traditional Horseshoe and Bar magnets are usually Alnico. Many purpose specific designs are available on request.

We have strong sintered AlNiCo permanent magnet production scale, can produce the performance of Alnico2-8 grades. And annual output nearly 400 tons. We have sintered and cast AlNiCo. All materials of sintering AlNiCo are totally same with the casting AlNiCo, which is produced by the method of powder metallurgy. Injection Molded Bonded NdFeB Magnets

Classification
Alnico magnets are traditionally classified using numbers assigned by the Magnetic Materials Producers Association (MMPA), for example, alnico 3 or alnico 5. These classifications indicate chemical composition and magnetic properties. (The classification numbers themselves do not have any direct relation to the properties of the magnet; for instance, a higher number does not necessarily indicate a stronger magnet.)  Buy Magnet AlNiCo Block 75mm X 12mm X 6mm
These classification numbers, while still in use, have been deprecated in favor of a new system by the MMPA, which designates Alnico magnets based on maximum energy product in megagauss-oersteds and intrinsic coercive force as kilooersteds, as well as an IEC classification system.