Alnico U-Channel Magnets Item No. MPACNL-01 series
Alnico Channel Grade 5 material, unpainted gray in color and have a maximum temperature of 550 degrees C / Max.Temperature, 1020 °F
Length tolerance is +/-0.045″, width & channel tolerances are +/- 0.016″ and thickness tolerance is +/-0.005″
5″ Length, 5/8” Width, 3/8” Thickness, 1/4” U-Channel Width
Maximum pull of 60 pounds
Alnico magnets aren’t as strong as rare earth magnets, but they withstand the highest temperatures.
Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
Alnico 5 Channel Magnet Magnetizing is done after the magnet has been machined to the correct tolerances. Care should be taken when handling alnico material since it is brittle and can chip or break if dropped on a hard surface. Also, because it has a low resistance to demagnetization, it will lose power if it is stored improperly (poles repelling each other). For best results, store magnetized alnico so that pieces are attracting each other, or with a steel keeper.
Alnico is a very hard and brittle material and does not lend itself to conventional machining. The MPCO employs experienced machinists and the proper equipment to grind alnico to its required dimensions.
Alnico channels are magnetized as a horseshoe with the South Pole on one side of the channel & the North Pole on the other side.
MPCO alnico channel magnets are made of cast Alnico 5 material. All dimensions approximate and as cast with pole faces ground smooth. Other sizes are available upon request.
| Thickness | Width | U-Channel Width | Length | Max. Pull, lbs. | Max. Temperature, °F | Grade | Item No. |
| 3/8“ | 5/8“ | 1/4“ | 5″ | 16 | 1020° | Alnico 5 | MPACNL-01 |
| 1/2“ | 3/4“ | 1/4“ | 6″ | 34 | 1020° | Alnico 5 | MPACNL-02 |
| 5/8“ | 1″ | 3/8“ | 6″ | 40 | 1020° | Alnico 5 | MPACNL-03 |
| 3/4“ | 1 1/4“ | 7/16“ | 6″ | 60 | 1020° | Alnico 5 | MPACNL-04 |
| 7/8“ | 1 1/2“ | 1/2“ | 6″ | 60 | 1020° | Alnico 5 | MPACNL-05 |
All Measurements are in inches (unless otherwise noted)
Direction of Magnetization (DOM) is through the thickness unless noted
Unless otherwise specified, magnets will be furnished in magnetized condition
Holding forces are approximate. These are average values obtained under laboratory conditions. Size, shape, and material of the test piece may affect actual pull forces
15000GS EAS Hard Tag Magnetic Detacher Clothing Alarm Tag Remover, Hard Tags Security Remover Magnetic Unlocker Detacher EAS, Supermarket Anti Theft Tag Remover Lock EAS Detacher Magnet, Pouch Magnetic Opener Buckle Detacher Magnet, Strong Magnetic Detacher Tool, Universal Security Tag Remover, Supermarket Metal Tag Remover, Magnetic Security Tag Remover for Clothing Strong Detacher Tool Retail […]
High Strength Magnetic Tag Removal Device, Hard Tags Security Remover Magnetic Unlocker Detacher EAS, Supermarket Anti Theft Tag Remover Lock EAS Detacher Magnet, Pouch Magnetic Opener Buckle Detacher Magnet, Strong Magnetic Detacher Tool, Universal Security Tag Remover, Supermarket Metal Tag Remover, Magnetic Security Tag Remover for Clothing Strong Detacher Tool Retail Store Home Use Quick […]
High-Strength Magnetic Superlock Cone Hard Tag Detacher, Hard Tags Security Remover Magnetic Unlocker Detacher EAS, Supermarket Anti Theft Tag Remover Lock EAS Detacher Magnet, Pouch Magnetic Opener Buckle Detacher Magnet, Strong Magnetic Detacher Tool, Universal Security Tag Remover, Supermarket Metal Tag Remover, Magnetic Security Tag Remover for Clothing Strong Detacher Tool Retail Store Home Use […]
15000GS Commercial Retail Store POS Security Tag Remover Magnets, Hard Tags Security Remover Magnetic Unlocker Detacher EAS, Supermarket Anti Theft Tag Remover Lock EAS Detacher Magnet, Pouch Magnetic Opener Buckle Detacher Magnet, Strong Magnetic Detacher Tool, Universal Security Tag Remover, Supermarket Metal Tag Remover, Magnetic Security Tag Remover for Clothing Strong Detacher Tool Retail Store […]