Injection Molded Plastic Magnet

Injection Molded Plastic Magnet, Axial Magnetized Injection Rare Earth Neodymium Magnet for Car Sensor, bonded NdFeB nylons 6, 11 and 12 and PPS thermoplastic injection permanent magnet assemblies for Automotive, BNI-3 Injection Molding Neodymium sensor magent for car heating installation China Factory

Injection Molded Plastic Magnet Technical
Material: Plastic Binders and NdFeB Powder
Method: Injection Mold
Part No.: MPBD-IM07H166
Magnetization:axial
Application:sensor magent for car heating installation
Flux Force:distance 2.5 mm per pole ≥200GS
Dimension:(ф13-ф4)×4
Grade: BNI-3
Application: Automotive
Tolerance: ±0.1 mm
Maximum Operation Temperature: 120 °C
Delivery Time: 15-30 days
Made in China

Injection Molded Plastic Magnet / Bonded
MPCO is an industry leader in the design and production of injection molded magnets. These unique magnets are made by mixing magnetic material with a polymer binder (usually nylon or PPS) which then allows the magnet to be injection molded just as any other plastic would be.

Injection molding allows the production of intricately shaped magnets with extremely tight tolerances and a wide variety of physical and magnetic characteristics.

A wide range of properties are possible depending on the type of magnetic material and binder utilized. MPCO offers both Neodymium and Hard Ferrite injection molding capability, and it is also possible to utilize a blend of different magnetic material to produce the desired properties.

MPCO’s knowledgeable product development team will assist you in choosing the optimal combination of binder and magnet material for your specific application. injection molded ndfeb, injection molding ndfeb magnet

One of the greatest advantages of the injection molding process is that a high degree of shape complexity is possible — ie. gears, snap fits and undercuts. It is also possible to incorporate shafts, brushes and other inserts into the process, simplifying the magnetic assembly manufacturing process. Injection molded magnets can be insert molded directly onto or around existing components, often eliminating the need for additional steps in the manufacturing process.