Plastic Over Molded Ferrite Magnets

Plastic Over Molded Ferrite Magnets for Speed Sensors, 8poles Diametrical Injection Molding Ferrite Sensor Magnets, Overmolding Ceramic Magnets, multipoles ferrite injection plastic magnet assembly, Anisotropic injection ferrites, PA12 PA6 PPS ferrite injection magnet China Supplier and Factory

Plastic Over Molded Ferrite Magnets for Sensors Technical
Material: Plastic Binders and Ferrite Powder
Method: Injection Mold
Part No.: MPBD-IFM076
Magnetization:outer 8poles
Application:speed sensor for hand electric drill
Flux Force:distance 1.3mm per pole ≥190GS
Dimension:(φ30-φ12.5)X5.1
Tolerance: ±0.1 mm
Maximum Operation Temperature: 180 °C
Delivery Time: 15-30 days
Made in China

Plastic Over Molded Ferrite Magnets Specialities:
Isotropic / Anisotropic Magnets can be manufactured with very high efficiency and reliability.
Consistent magnetic and dimensional characteristics without any additional processing.
It consists of large variety of shaping possibilities. Equally Intricate and complex shapes can be manufactured.
Reduction in weight of the magnet as compared to isotropic sintered magnets without any reduction in magnetic properties.
Monobloc molding (Insert molding / Over molding) possible.
Highly competitive for mulitpole motor and sensor magnets.
Very good edge strength.
High Degree of machine ability, if required.

Plastic Injection Bonded Ferrite Magnet with Complex Shaped, injection molded ceramic magnets
1, Injection molded ndfeb magnets can be of very simple shapes or very complex
2, All or only part of the device may be magnetized
3, It is sometimes cost advantageous to make an entire part out of the magnet material and just magnetize the portion requiring magnetic output
4, Bonded magnets can be made from either hard ferrite materials or rare earth magnetic powder
5, They are manufactured using both injection molding and compression bonding techniques which are fully automated and are particularly suitable for high volume production
6, We are original Injection Moulded NdFeB magnet manufacturer in China, our magnets are made with the highest quality..

Features
Injection Bonded Ferrite Magnets The injection bonded ferrite magnets have the following features:
They can be designed to produce complex shape.
Due to their anti-oxidation characteristics they are non corrosive.
These magnets can be magnetized both axially and radially.
Ferrite magnets have high dimensional precision
They are impact resistant.