Plate House Magnet Separator

Plate House Magnet Separator, Magnetic Chutes with Round Inlet and Outlet, Plate Housing Magnets, Chute and hump magnetic separators, chute magnets, Plate Magnet Housing, Separation Plate Pipe Magnets

Plate House Magnet Separator with Round Inlet and Outlet Item No. MP-MC150 /200 /250 series – Magnetic Chutes are used for trapping and separating iron particles mixed with dry, granular or powdered materials. They are generally used where flowing material characteristics are sticky and non free flowing. They come with either Conical Magnets fitted on hinged doors or Magnetic Plates fitted on the sides. These systems are easy to clean and maintain.

Industries Using Magnetic Chutes:
Plastics
Food
Spices
Chemicals
Dyes & Powder Pigments

Features:
1. Finishing: The housing can be sand blasted or Brushed finish
2. Material: All the materials are 100% stainless steel.
3. Magnet: Either rare-earth magnet or Ferrite Magnet
4. Type of connection: Round or Square is available to your existing line.
5. Customer designs, specifications can be fulfilled.

Application Area
Any powder, granular materials, lumpy is also suitable. principle of magnetic chute
How to do cleaning?

In order to ensure perfect performance, it has to check periodically. Once it need to be cleaned, release latch and do the wiping. Use extreme caution and wear gloves during the process.

How to select our products?
Please advise us the above necessary information to make enquiry. If you are not in a position to offer such information, also please feel free to contact our engineer and discuss the application condition, like material viscosity, hourly volume and so on. Magnetic Chutes

Features:
1. Two high powered Rare Earth plate magnets are positioned opposite each other so the magnetic field reaches into the product from both sides capturing and holding ferrous contamination.
2. Both magnets are hinged so all cleaning is done outside the chute.
3. Raised catchment strips are fully welded onto the magnet face plate allowing small to fine contamination to hide behind, helping to stop contamination wash off from the continuous product flow.
4. A wedge-shaped deflection bar can be positioned at the top of the housing, helping to deflect the product towards the plate magnets.
5. All chute magnets are custom made so any special requirements can be incorporated.
6. Inlet/outlet flanges to fit new or existing lines.
7. Used for product purity or mounted to processing equipment to stop damage caused by nuts, bolts etc.
8. Custom units built to suit your requirements

Plate Housing Magnet Drawing