PTFE Teflon Coated Cuntersunk Magnets

/PTFE Teflon Coated Cuntersunk Magnets
  • Teflon Coated Cuntersunk Magnets
Primary Competitive Advantages:
  • We are A Professional Permanent Magnets & Magnetic Assemblies Company Operating Since 2004
  • All Magnetic Grade for Sintered & Bonded Magnets
  • Our Quality Guaranteed
  • We Ship Worldwide
  • Small Orders Accepted
  • OEM Design Approvals
  • All Payment Accepted
  • PTFE Teflon Coated Cuntersunk Magnets, PTFE Coated Cuntersunk Neodymium Magnets, PTFE coated Neo Magnets with Countersunk Hole, PTFE Teflon Coating Strong NdFeB Magnet w/ Cuntersink hole, Teflon Coated Magnets with Countersink Hole

    PTFE Teflon Coated Cuntersunk Magnets Features:

    Part No.: MPPTFE-CS Series
    Total outter diameter (D): custom
    Total countersunk hole diameter (d): custom
    Total height (H): custom
    Material: Neodymium (NdFeB, Neo) + Teflon
    Magnet Grade: N35, N38, N40, N42, N45, N48, N50, N52 etc. custom
    Magnet Shape: Countersunk hole
    Plating/Coating: Nickel (Ni-Cu-Ni) and PTFE
    Max Operating Temp: 176ºF (80ºC)
    Tolerances: ±0.01 x ±0.01 mm
    Color: White(common), Black, Blue or customized
    Magnetization Direction: Magnetized Through Thickness (Poles on Flat Ends)

    countersunk hole for fixing, Each magnet has its north pole on the countersunk face. Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface. PTFE coated to increase friction and prevent marking other contact surfaces. PTFE Coated Cuntersunk Magnet Neodymium Can be fixed in place with our countersunk screws.

    The teflon coating is special coated, which has many advance itself, the characteristic as follows:
    2.SST(Salt Spray Test)120 hours
    3.Enviromental, it can work in the application which had requirement to the water quality
    4.Wearable, good for anti-attrition
    5.High working temperature, which can work under 380ºC
    6.It can work in acid circumstance or alkaline circumstance

    Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the south pole on the countersunk face. other product: magnetic multipole ring ferrite sensor

    Item No. Magnet Grade OD / D Countersink / d H PTFE Color
    MPPTFE-CS-1  N35, N38, N40, N42, N45, N48, N50, N52 26.4mm  6.2mm 6.2mm White / Blue / Black / Gray / Red …
    MPPTFE-CS-2 52.8mm 12.4mm 12.4mm
    MPPTFE-CS-3 32mm 8mm 10mm
    MPPTFE-CS-4 46mm 16mm 12mm
    MPPTFE-CS-5 19.1mm 12.7mm 12.7mm

    For Example:  grade N42, color white, Part No. is MPPTFE-CS-1-N42-White

    error: Content is protected !!