Rare Earth Neodymium Teardrop Magnetic Tubes, Tear-Drop Special Design Magnetic Tube Separator Water Filter, Super Strong Easy-cleaning Rectangle Bar Magnets, Stainless Steel NdFeB Magnetic Stick Rods, Sintered Ferrite Ceramic magnetic rods, Teardrop permanent magnetic tube, SS304/316 Separator Magnetic Filter Bar Roller China supplier factory
Rare Earth Neodymium Teardrop Magnetic Tubes Features
Teardrop profile for filtering Fine Powders.
Helps prevent build-up of powder which can cause bridging & blockages.
Powder flows down the sides of the tube instead of piling up on the top.
Ferrous contaminants are captured and migrate to the underside of the magnet.
25mm wide x 36mm high & custom made to your length.
Plain or Tapped ends with 1 or 2 holes for mounting.
Contact us for a brochure with more information.
Specification
1. Magnetic Force between 3,000 to 13,000 Gauss according to customer needs.
2. Pipe Material: SUS304, SUS316 Tube Diameter: φ 25.4 mm
3. Tube shape can be made with round-type, square-type or tear-drop-type (Tear-drop-type pipe material: SUS304).
Tube Magnets are used extensively in the processing industry to capture magnetic susceptible foreign bodies, including screws, nuts, bolts, and small iron shards, in both dry and wet applications. Metal Contamination causes damage to delicate processing equipment, as well as affecting the end-quality and purity of the product. Tube Magnets are commonly used in the form of a Grate Magnet, where several Tubes form a Magnetic Separation grid. New Rare Earth Teardrop Magnet Tube Bar
Rare Earth Magnets are constructed out of Neodymium Iron Boron magnet slugs. These produce the highest permanent magnetic field and are used to separate very fine iron and weakly magnetic stainless steel from solids and liquids.
Even though the Rare Earth Tube Magnet is a sphere, fine non-magnetic material often builds up on the upper-most point of the Tube. Over time this ‘bridging’ can increase and ultimately cause a blockage. The build-up always reduces the separation performance, increasing the likelihood of metal contamination continuing through the process. Tear-Drop Shaped Magnetic Bar Filters
The new MPCO Teardrop Magnet has the point of the tear orientated into the product flow. The surface area on the point of the tear is very small and prevents fine powder collecting on the surface. The powder then flows under gravity over the side of the Tube Magnet, with any magnetically susceptible materials attracted to the high magnetic force. These magnetics migrate to the bottom of the Tube Magnet, where they are securely held away from the product flow.
The new MPCO Teardrop Tube Magnet is available as a single Tube or as part of a multi-Tube Grate Magnet assembly.
Related