Square Waterproof Aluminum Alloy Magnetic Catch, Rectangle Screw-On Plastic Shell Embedded Square Magnetic Holder Catch for Screw Fixing, Cabinet Door magnetic touch, Magnetic Closure, Concealed Tap-in Magnetic Closer Catcher, rectangle door stopper, neodymium magnetic cabinet catches and latches, Knock-in Recessed Magnetic Catches, Superior Panel & Cabinet Magnets Hardware Accessories China Factory Supplier Square Waterproof Aluminum […]
Rubber Coated Neodymium Magnets with External Thread, NdFeB Pot magnet flat with threaded neck and rubber Santoprene coating, Magnet assembly NdFeB rubber coat black with external threaded stem, Rubber plastic coated Flat holding magnet systems with external thread China Supplier
Rubber Coated Neodymium Magnets with External Thread – Magnetic Systems with External Screw Thread
This series consists of permanent-magnetic holding systems mainly used on sensitive surfaces as, for instance, on steel sheet with surface coatings like paint, chrome, nickel, etc. Due to the rubber-type consistency of Santoprene, the sensitive surfaces are protected against scratches (provided the surfaces are clean). Moreover, strong friction forces sideways for resistance to displacement are achieved due to the favorable friction coefficient of Santoprene.
Round neodymium magnetic system with rubber coating and external threaded pin/external thread. The rubber coating protects all surfaces and increases the adherence.
These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating.
Galvanized body coated with SANTOPRENE, neodymium magnetic core, anisotropic, working temperature max. +60°C.
The holding force is determined at room temperature (20°C) on a polished plate made of mild steel with a thickness of 10 mm by pulling the magnet vertically from the surface (1 kg ≈ 10 N). A deviation of -10% in the stated values is possible in exceptional cases. In general, the value will be exceeded.
Alternative to the standard we also offer individual solutions:
» Other colours rubber coating
» Rubber coating harder or softer
» printable rubber coat
|Part No.||Size [mm]|
|D||H||L||M||Weight [g]||Holding force² [N]|
|RCMS01-12||12||7,5||15,5||4 x 8||4.5||13|
|RCMS01-22||22||6||12,5||4 x 6,5||11||50|
|RCMS01-43||43||6||21,0||6 x 15||32||85|
|RCMS01-66||66||8,5||23,5||8 x 15||107||180|
|RCMS01-88||88||8,5||23,5||8 x 15||193||420|
² Holding force
The holding forces are ascertained using an even polished plate of Stainless steel SS304 material with a thickness of 10 mm by the vertical withdrawal of the magnet at room temperature. Small cracks in the magnet material do not affect the holding force. Deviations up to minus 10 % are possible in some instances. The data given relates to minimum values which are normally exceeded. plastic over molded ferrite magnets